
02 connectivity
tomek-szczesny/byos_m2
Build Your Own System - a collection of stackable add-ons

Custom STM32 based led strip controller targeting WS2815. Features include Ethernet, WiFi, USB-C (USB 2.0) and a load switch for disconnecting the strip's power
Stm32-led controller is an open-source printed circuit board by Joseph-Ladino, from the Joseph-Ladino/stm32-led-controller repository on GitHub. It is a 2-layer board of 102.8 × 40.5 mm with 67 parts on 125 nets, routed with 805 tracks and 53 vias.
It is built around the SN74AHCT125N, W5500 and ABM8-25.000MHZ-B2-T, with the ABM8-48.000MHZ-B2-T, FSM4JH and RB1-125BAG1A among its other parts. Its parts include 28 capacitors, 17 resistors, 6 ICs, 6 connectors and 4 diodes. It belongs with the radio and wireless and lEDs and displays boards and the STM32 boards of this library.
This is a hobby project using an STM32 microcontroller to control WS2815 LED strips over ethernet. While it’s a fun interesting setup, it’s still a work in progress, so the design and code have plenty of room for improvement.
The controller is built around a custom PCB and features:
Known Issues:
The firmware is written in C++ with portability and extensibility as guiding principles:
Firmware/Docs folder.Known Issues:
To try it out:
Connect Power and LEDs:
Upload Firmware:
Run and Debug:
| Feature | Description |
|---|---|
| Microcontroller | STM32G0B0RE |
| Ethernet | W5500 (100/10 Ethernet) |
| LED Output Connector | 4-pin (for WS2815 LED strip) |
| Debugging | USB-C, SWD for flashing |
| Power Input | 12V screw terminal |
| Voltage Conversion | Buck converter (12V to 5V) |
| Data Buffer | SN74125N for 5V data signals |
| Regulator | 3.3V for STM32 and W5500 |
This project is more of a learning exercise in PCB design and STM32 programming, so it might not be the most optimized controller out there! Any feedback or suggestions are welcome.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C11, C12, C13, C14, C15, C16, C17, C19, C23 |
| 4 | 30pF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C25, C26 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R15 |
| 4 | 49.9 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C24, C28 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.3 | C18, C20 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R14, R16 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C27 |
| 2 | 5.11K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 6.8nF | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 2 | D_Schottky | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1, D2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 100R | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 12.4K | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 12401610E4-2A | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J3 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | ABM8-25.000MHZ-B2-T | SnapEDA Library:XTAL_ABM8-48.000MHZ-B2-T | Y2 |
| 1 | ABM8-48.000MHZ-B2-T | SnapEDA Library:XTAL_ABM8-48.000MHZ-B2-T | Y1 |
| 1 | BLM18PG121SN1D | SamacSys_Parts:BLM18SP221SN1B | FB2 |
| 1 | Conn_02x04_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J6 |
| 1 | DML3006LFDS-7 | SamacSys_Parts:DML3006LFDS7 | U5 |
| 1 | EXT_PWR_CONN | Custom Connectors:1x02 M4 RING | J1 |
| 1 | FSM4JH | SamacSys_Parts:FSM4JH | SW1 |
| 1 | G*** | Custom:logo | svg2mod |
| 1 | Mini360 | Mini360_step-down:Mini360_step-down | U1 |
| 1 | NCV1117ST33T3G | SamacSys_Parts:SOT230P700X180-4N | U2 |
| 1 | RB1-125BAG1A | RB1-125BAG1A:WIZNET_RB1-125BAG1A | J5 |
| 1 | SN74AHCT125N | SamacSys_Parts:DIP794W53P254L1930H508Q14N | U4 |
| 1 | STM32G0B0RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SWD_CONN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | WS2815 | Custom Connectors:LED Strip Connector | J4 |

tomek-szczesny/byos_m2
Build Your Own System - a collection of stackable add-ons


farlepet/keithley-615-printer-boards
Drop-in replacements for the buffer/printer boards for the Keithley 615 Electrometer

BroncoSpace-Lab/scales-hardware
Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)

SeanDS/environment-sensor
Ethernet-enabled dust particle, temperature and humidity sensor module

codingcatgirl/split-flap-fae-pcb
Alternative drop-in replacement PCB for David Kingsman's split-flap display


AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.
It measures 102.8 × 40.5 mm and has 2 copper layers, 1.6 mm thick.
67 parts, built around the SN74AHCT125N, W5500, ABM8-25.000MHZ-B2-T and ABM8-48.000MHZ-B2-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Joseph-Ladino/stm32-led-controller repository on GitHub, at the commit this page was made from: the board is PCB/STM32 Led Controller.kicad_pcb and its schematic PCB/STM32 Led Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Joseph-Ladino before reusing the design.