4 layers80 × 60 mm
Winglet Carrier
TL-Embedded/Winglet-Carrier
This is a development board to faciliate testing of the winglet modems.
69 parts
4 layers23.7 × 15.6 mm
RC RX HW
Lambosaurus/RC-RX-HW- Size
- 23.7 × 15.6 mm
- Copper layers
- 4
- Thickness
- 1.36 mm
- Parts
- 28
- Nets
- 39
- Pads
- 115
- Tracks, vias
- 180, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Jan 2023
- Updated
- 3 Jan 2023
Overview
RC RX HW is an open-source printed circuit board by Lambosaurus, from the Lambosaurus/RC-RX-HW repository on GitHub. It is a 4-layer board of 23.7 × 15.6 mm with 28 parts on 39 nets, routed with 180 tracks and 54 vias.
It is built around the SI24R1, B3U-1100P and ECS-160-10-37-RWM-TR. Its parts include 13 capacitors, 4 resistors, 3 inductors, 2 ICs and 2 connectors. It belongs with the STM32 boards of this library.
Main components
3
SI24R1
QFN-20-EP(4x4)-40℃~+85℃ -96dBm 1.9V~3.6V 12mA 15mA 2.4GHz 2.4GHz~2.525GHz 2Mbps 7dBm ISM SPI Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHS南京中科微RF Transceiver ICs
B3U-1100P
SMD-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 200,000 cycles 3mm 50mA Round Button SMD(SMT) Tab SPST-NO Surface Mount,Vertical SMD Tactile Switches ROHSOmronTactile Switches
ECS-160-10-37-RWM-TR
SMD2016-4P-20℃~+70℃ 100Ω 10pF 16MHz ±15ppm ±15ppm SMD2016-4P Crystals ROHSECSCrystals
README
README.mdRC_RX_HW
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | C_Capacitor:C_0402 | C5, C12, C13 |
| 2 | 2.2n | C_Capacitor:C_0402 | C1, C7 |
| 2 | 22p | C_Capacitor:C_0402 | C2, C3 |
| 2 | 33n | C_Capacitor:C_0402 | C4, C6 |
| 2 | 47K | R_Resistor:R_0402 | R3, R4 |
| 1 | 1.0p | C_Capacitor:C_0402 | C10 |
| 1 | 1.5p | C_Capacitor:C_0402 | C8 |
| 1 | 10u | C_Capacitor:C_0805 | C11 |
| 1 | 2.7nH | L_Inductor:FB_0402 | L1 |
| 1 | 22K | R_Resistor:R_0402 | R1 |
| 1 | 3.9nH | L_Inductor:FB_0402 | L3 |
| 1 | 300R | R_Resistor:R_0402 | R2 |
| 1 | 4.7p | C_Capacitor:C_0402 | C9 |
| 1 | 8.2nH | L_Inductor:FB_0402 | L2 |
| 1 | Antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | B3U-1100P | S_Switch:Button_3.0x2.5 | S1 |
| 1 | ECS-160-10-37-RWM-TR | Y_Oscillator:Crystal_SMD4_2.0x1.6 | Y1 |
| 1 | LED,BLU | DS_LED:DS_0603 | DS1 |
| 1 | Pins_2.54_1x4 | J_Connector:Pins-2.54-1x4 | J1 |
| 1 | SI24R1 | U_IC:QFN20_05_4x4_EP | U1 |
| 1 | STM32G061GxUx | U_IC:QFN28_05_4x4 | U2 |
| 1 | TC_2030_NL_STLINK | N_NonPart:TagConnect_2030_NL | J2 |
Questions
How big is the RC RX HW PCB?
It measures 23.7 × 15.6 mm and has 4 copper layers, 1.36 mm thick.
What parts does the RC RX HW use?
28 parts, built around the SI24R1, B3U-1100P and ECS-160-10-37-RWM-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC RX HW KiCad files?
From the Lambosaurus/RC-RX-HW repository on GitHub, at the commit this page was made from: the board is RC_RX_HW.kicad_pcb and its schematic Micro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC RX HW design in my own project?
Its repository states no licence, so its author keeps all rights: ask Lambosaurus before reusing the design.
Similar boards
- 4 layers80 × 35 mm
- 2 layers75.9 × 72.4 mm
OpenDTU
plewka/ESP-Solar_OpenDTU
PCB for OpenDTU in Cable Branchbox, LineSupply w. Fuses, RS485/RS232-Olimex, Relais, DS2485 OneWire, I2C-Header...
46 parts4GPL-3.0 - 4 layers99.5 × 92.3 mm
Brain board
Batterhead221/brain_board
Custom STM32H753 brain board with USB-C power/input selection, 3.3V buck regulation, microSD, CAN, RS-485, FRAM, flash, debug/programming access, and expansion connectors.
131 partsMIT - 4 layers36.3 × 38 mm
- 4 layers
- 4 layers85 × 25 mm
- 4 layers25.1 × 34 mm
Pe42543 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
28 parts205