2 layers27.4 × 60 mm
4 layers80 × 60 mm
Winglet Carrier
TL-Embedded/Winglet-CarrierThis is a development board to faciliate testing of the winglet modems.
- Size
- 80 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 108
- Pads
- 318
- Tracks, vias
- 473, 246
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Aug 2024
- Updated
- 9 Aug 2024
Overview
Winglet Carrier is an open-source printed circuit board by TL-Embedded, from the TL-Embedded/Winglet-Carrier repository on GitHub. It is a 4-layer board of 80 × 60 mm with 69 parts on 108 nets, routed with 473 tracks and 246 vias.
It is built around the USBLC6-2SC6, USB4105-GF-A-060 and 150060BS55040, with the 150060YS55040, 2N7002-7-F-ES and ASPI-4030S-3R3M-T among its other parts. Its parts include 17 resistors, 15 capacitors, 5 ICs, 5 connectors and 3 inductors. It belongs with the STM32 boards of this library.
Main components
9
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
USB4105-GF-A-060
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
150060BS55040
0603-40℃~+85℃ 1000V 140° 1mm x 0.8mm square LED 20mA 3.2V 40nm 465nm 470nm 78mW 80mcd Blue Discrete Diode Frosted Clear Lens InGaN 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete150060YS55040
0603-40℃~+85℃ 100mcd 140° 20mA 2V 48mW 589nm 591nm Discrete Diode Yellow 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
2N7002-7-F-ES
SOT-23-55℃~+150℃ 1 N-channel 1.6V 1.85Ω@10V、2.05Ω@4.5V 1.8nC@4.5V 11pF 28pF 300mA 350mW 4pF 60V N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
ASPI-4030S-3R3M-T
SMD,4x4mm2.4A 3.3A 3.3uH 40mΩ ±20% SMD,4x4mm Power Inductors ROHSAbraconPower Inductors
ECS-160-10-37-RWM-TR
SMD2016-4P-20℃~+70℃ 100Ω 10pF 16MHz ±15ppm ±15ppm SMD2016-4P Crystals ROHSECSCrystals
LTST-C19HE1WT
1.6x1.6mm-20℃~+80℃ 0.35mm 1.6mm 1.6mm 1.8V~2.4V 112mcd~450mcd 130° 2.8V~3.9V 2.8V~3.9V 20mA 20mA 20mA 28mcd~180mcd 45mcd~180mcd 468nm 470nm 520nm 525nm 624nm 632nm 75mW 80mW 80mW Common Anode White Lens SMD-4P,1.6x1.6mm RGB LEDs ROHSLite-OnLight Emitting Diodes (LED)MM60-EZH039-B5-R850
SMDSMD PCI / PCIe Connector ROHSJAE ElectronicsEdgeboard Connectors
README
README.mdWinglet Carrier
This is a development board to faciliate testing of the winglet modems.
This provides power and connectivity to the modem, and access to all interfaces.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | C_Capacitor:C_0603 | C3, C8, C9, C10, C11, C12, C13 |
| 5 | 10K | R_Resistor:R_0603 | R1, R4, R5, R7, R12 |
| 5 | 330R | R_Resistor:R_0603 | R6, R11, R15, R16, R17 |
| 4 | 5K1 | R_Resistor:R_0603 | R8, R9, R13, R14 |
| 4 | Mount_M3 | M_Mechanical:Mount_M3 | M1, M2, M3, M4 |
| 4 | ToolingHole | N_NonPart:ToolingHole_1mm | N1, N2, N3, N4 |
| 3 | 10u | C_Capacitor:C_0805 | C1, C4, C7 |
| 3 | 22u | C_Capacitor:C_0805 | C2, C5, C6 |
| 2 | 12p | C_Capacitor:C_0603 | C14, C15 |
| 2 | 1K | R_Resistor:R_Array_1206 | R2, R3 |
| 2 | BLM18KG601SN1D | L_Inductor:FB_0603 | L1, L2 |
| 2 | Pins_2.54_1x2 | J_Connector:Pins-2.54-1x2 | J1, J2 |
| 2 | TC2050_SWD_UART | N_NonPart:TagConnect_TC2050 | N5, N6 |
| 2 | USB4105-GF-A-060 | J_Connector:USB_C_USB4105-GF-A-060 | J4, J5 |
| 2 | USBLC6-2SC6 | U_IC:SOT23_6 | U2, U4 |
| 1 | 150060BS55040 | DS_LED:DS_0603 | DS1 |
| 1 | 150060YS55040 | DS_LED:DS_0603 | DS2 |
| 1 | 1775862-2 | J_Connector:1775862-2 | J3 |
| 1 | 2N7002-7-F | U_IC:SOT23_3 | Q1 |
| 1 | 31K6 | R_Resistor:R_0603 | R10 |
| 1 | AP22804AW5-7 | U_IC:SOT23_5 | U1 |
| 1 | AP62301WU-7 | U_IC:SOT23_6 | U3 |
| 1 | ASPI-4030S-3R3M-T | L_Inductor:L_4030S | L3 |
| 1 | ECS-160-10-37-RWM-TR | Y_Oscillator:Crystal_SMD4_2.0x1.6 | Y1 |
| 1 | G*** | kibuzzard-66B59C2B | kibuzzard-66B59C2B |
| 1 | G*** | kibuzzard-66B59BD0 | kibuzzard-66B59BD0 |
| 1 | G*** | kibuzzard-66B59C6F | kibuzzard-66B59C6F |
| 1 | G*** | kibuzzard-66B59C7E | kibuzzard-66B59C7E |
| 1 | G*** | kibuzzard-66B59C37 | kibuzzard-66B59C37 |
| 1 | G*** | kibuzzard-66B59CA2 | kibuzzard-66B59CA2 |
| 1 | G*** | kibuzzard-66B59C9C | kibuzzard-66B59C9C |
| 1 | LTST-C19HE1WT | DS_LED:DS_0606 | DS3 |
| 1 | MM60-EZH039-B5-R850 | M_Mechanical:MM60-EZH039-B5-R850 | M5 |
| 1 | STM32F072CxUx | U_IC:QFN48_05_7x7_EP | U5 |
| 1 | TL_Embedded | N_NonPart:TL_Embedded_10mm | ~ |
Questions
How big is the Winglet Carrier PCB?
It measures 80 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Winglet Carrier use?
69 parts, built around the USBLC6-2SC6, USB4105-GF-A-060, 150060BS55040 and 150060YS55040. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Winglet Carrier KiCad files?
From the TL-Embedded/Winglet-Carrier repository on GitHub, at the commit this page was made from: the board is Winglet-Carrier.kicad_pcb and its schematic Winglet-Carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Winglet Carrier design in my own project?
Its repository states no licence, so its author keeps all rights: ask TL-Embedded before reusing the design.
Similar boards
- 4 layers120 × 107 mm
SL23-modem tester
JitterCompany/debug-tools
Collection of useful utility PCBs for development purposes
229 partsMIT - 4 layers23.7 × 15.6 mm
- 4 layers145 × 99.1 mm
Powersupply
SR-Madsen/CocktailMachine
Contains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.
136 parts - 4 layers190 × 90 mm
- 8 layers80 × 80 mm
- 2 layers66.3 × 70.3 mm
Bldc driver
acanyulaf/24V-10A-BLDC-Driver
This is a technical assignment problem given by Kuartis. The aim is to design a 24V/10A BLDC controller. There will be also an I2C or SPI interface for control inputs.
66 parts - 4 layers60 × 58 mm
ProjetCorps
mael-lukas/2324_Projet1AB_Animatronic
Projet d'électronique 1ère année A et B - Création d'un animatronic.
64 parts