2 layers126.8 × 42.3 mm
DriverDisplay4
Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.
40 parts
2 layers
DriverDisplay2
Lafayette-FSAE/DriverDisplayBreakout board for interfacing with and controlling the driver's display.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 42
- Pads
- 140
- Tracks, vias
- 284, 39
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Nov 2019
- Updated
- 22 Mar 2022
Overview
DriverDisplay2 is an open-source printed circuit board by Lafayette-FSAE, from the Lafayette-FSAE/DriverDisplay repository on GitHub. It is a 2-layer board with 30 parts on 42 nets, routed with 284 tracks and 39 vias.
It is built around the MCP2551-I/SN-HG and V7805-500. Its parts include 10 resistors, 6 capacitors, 3 ICs, 2 diodes and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
2Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R5, R11 |
| 2 | .1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R6 |
| 2 | 68 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R9 |
| 2 | 750 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R10 |
| 2 | LED_Dual_ACA | LED_THT:LED_D5.0mm-3 | D3, D4 |
| 2 | PushButton | Lafayette_Electric_Car_Footprints:PushButton | BTN1, BTN2 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | Display | Connector_JST:JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal | J2 |
| 1 | ESP32_Devkit_DOIT_V1 | ESP32_Shield:ESP32_Devkit_DOIT_V1 | ESP321 |
| 1 | GLV/CAN | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J1 |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | V7805-500 | Lafayette_Electric_Car_Footprints:VX7805-500 | U2 |
| 1 | V7809-500 | Lafayette_Electric_Car_Footprints:VX7805-500 | U3 |
Questions
What parts does the DriverDisplay2 use?
30 parts, built around the MCP2551-I/SN-HG and V7805-500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverDisplay2 KiCad files?
From the Lafayette-FSAE/DriverDisplay repository on GitHub, at the commit this page was made from: the board is 2021_or_older/Leah/DriverDisplay2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverDisplay2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Lafayette-FSAE before reusing the design.
More from Lafayette-FSAE/DriverDisplay
3- 2 layers143.5 × 42.3 mm
DriverDisplay3
Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.
34 parts - 2 layers197.5 × 73.7 mm
Front Dash
Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.
27 parts
Similar boards
- 2 layers80 × 60 mm
Two phase charging
HuntieDK/BMW-i3-two-phase-charging
Extends the BMW i3 60Ah BEV/REX charging to use two phases
73 parts8MIT - 2 layers121.9 × 83.8 mm
SegMan
Lafayette-FSAE/SegMan
A KiCad Schematic for SegMan, A Segment Management Board for the Lafayette FSAE Accumulator Management System
60 parts - 2 layers158.8 × 159.8 mm
- 4 layers100 × 50 mm
- 2 layers67.3 × 54 mm
Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers120 × 100 mm
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 4 layers115 × 78 mm
- 4 layers103 × 82.4 mm
