
DriverDisplay4
Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.

Breakout board for interfacing with and controlling the driver's display.
Front Dash is an open-source printed circuit board by Lafayette-FSAE, from the Lafayette-FSAE/DriverDisplay repository on GitHub. It is a 2-layer board of 197.5 × 73.7 mm with 27 parts on 22 nets, routed with 250 tracks and 42 vias.
It is built around the EEE-FK1H101L and EEV226M050A9GAA. Its parts include 7 ICs, 7 diodes, 2 capacitors and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | AL5809-20P1-7 | Front_Dash:AL5809-60P1-7 | U1, U2, U3, U4, U5, U6, U7 |
| 4 | LOGO | custom:LafayetteKeep | G***, G***, G***, G*** |
| 3 | LED-GRN-C503B-GCN-CY0C0792 | LED_THT:LED_D5.0mm | D1, D2, D7 |
| 3 | LED-RED-C503C-RCS-CYAZaAA2 | LED_THT:LED_D5.0mm | D3, D5, D6 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3 |
| 1 | 24V-5V | Voltage Regulator:PQQ6W-Q24-S5-S | PS1 |
| 1 | Conn_01x02_Female | Connector_Molex:Molex_SPOX_5267-02A_1x02_P2.50mm_Vertical | J2 |
| 1 | Conn_01x10_Female | Connector_Molex:Molex_SPOX_5267-10A_1x10_P2.50mm_Vertical | J1 |
| 1 | EEE-FK1H101L | Front_Dash:EEETC1V470P | C1 |
| 1 | EEV226M050A9GAA | Front_Dash:CAPAE660X565N | C2 |
| 1 | LED-AMB-C503B-AAS-CZ0B0342 | LED_THT:LED_D5.0mm | D4 |
| 1 | LOGO | custom:Lafayette | G*** |

Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.

Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.

Lafayette-FSAE/DriverDisplay
Breakout board for interfacing with and controlling the driver's display.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
It measures 197.5 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the EEE-FK1H101L and EEV226M050A9GAA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Lafayette-FSAE/DriverDisplay repository on GitHub, at the commit this page was made from: the board is 2022/Front_DashV1.2/Front Dash.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Lafayette-FSAE before reusing the design.