Skip to the content
4 layers50.8 × 84 mmBigMuffRipOff, the printed circuit board in 3D

PCB Board design and development for RGA (Recording Guitar Amplifier)

Size
50.8 × 84 mm
Copper layers
4
Thickness
1.6 mm
Parts
92
Nets
73
Pads
277
Tracks, vias
361, 92
Pours
7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Jan 2026
Updated
26 Mar 2026

Overview

BigMuffRipOff is an open-source printed circuit board by kyledenobel, from the kyledenobel/RGA_Boards repository on GitHub. It is a 4-layer board of 50.8 × 84 mm with 92 parts on 73 nets, routed with 361 tracks and 92 vias.

It is built around the STM8L152K4T6, R-78E3.3-0.5 and ADP7118AUJZ-4.5-R7, with the NMJ6HFD2-AU, 284697-E and B3FS-1010P among its other parts. Its parts include 29 capacitors, 29 resistors, 10 ICs, 8 connectors and 4 transistors. It belongs with the audio and music boards and the STM8 boards of this library.

Main components

7

README

README.md

RGA_Boards

PCB Board design and development for RGA (Recording Guitar Amplifier)

Issues and Organization

After completing an issue for board design, please mark as resolved and mention your branch/merge and create another issue for fabrication with the milestone "All Boards Have Been Fabricated" linked to the issue. Similarly, after fabrication is finished, make an issue for testing with the milestone "All Boards Have Been Tested" linked to the issue.

Parts

92
QtyValueFootprintReferences
170.1uCapacitor_SMD:C_0603_1608MetricC1, C3, C4, C6, C7, C12, C13, C16, C17, C18, C21, C22, C23, C24, C25, C26 +1
4100kResistor_SMD:R_0603_1608MetricR2, R9, R14, R19
412kResistor_SMD:R_0603_1608MetricR5, R12, R15, R22
41N4148W-13-F284867-E-footprint:SOD123_DIOCR1, CR2, CR3, CR4
4470kResistor_SMD:R_0603_1608MetricR3, R11, R13, R20
4BC549Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3, Q4
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
4TPL0501-100DCNR284867-E-footprint:SOT65P280X145-8NU1, U2, U3, U8
3100Resistor_SMD:R_0603_1608MetricR6, R10, R16
32125201004284867-E-footprint:CONN_2125200001-SD_04_MOLJ4, J6, J7
333kResistor_SMD:R_0603_1608MetricR1, R17, R18
3470pCapacitor_SMD:C_0603_1608MetricC2, C5, C9
3500kResistor_SMD:R_0603_1608MetricR26, R27, R28
3TL071HIDBVR284867-E-footprint:SOT23_DBV_5_TEXU4, U5, U7
210kResistor_SMD:R_0603_1608MetricR23, R25
210uCapacitor_SMD:C_0603_1608MetricC14, C15
22.2uCapacitor_SMD:C_0603_1608MetricC19, C20
28.2kResistor_SMD:R_0603_1608MetricR4, R8
2LOGOLOGOG***, G***
2NMJ6HFD2Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_HorizontalJ2, J3
10.004uCapacitor_SMD:C_0603_1608MetricC10
10.01uCapacitor_SMD:C_0603_1608MetricC11
1100nCapacitor_SMD:C_0603_1608MetricC28
110nCapacitor_SMD:C_0603_1608MetricC27
11uCapacitor_SMD:C_0603_1608MetricC30
12.7kResistor_SMD:R_0603_1608MetricR21
120kResistor_SMD:R_0603_1608MetricR24
1270Resistor_SMD:R_0603_1608MetricR30
1284697-E284867-E-footprint:284697EJ1
1560Resistor_SMD:R_0603_1608MetricR7
1ADP7118AUJZ-4.5-R7284867-E-footprint:UJ-5_ADIU6
1B3FS-1010PButton_Switch_SMD:SW_SPST_Omron_B3FS-101xPSW3
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1LEDLED_SMD:LED_0603_1608MetricD1
1PJ-007284867-E-footprint:CONN_PJ-007_SSDJ5
1R-78E3.3-0.5Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THTU10
1STM8L152K4T6284867-E-footprint:LQFP-32U9

More from kyledenobel/RGA_Boards

10
  • 4 layers60.9 × 32 mmBigMuffRipOff, the printed circuit board in 3D

    BigMuffRipOff

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    78 parts
  • 4 layers76.2 × 71.1 mmAnalog Controller, the printed circuit board in 3D

    Analog Controller

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    77 parts
  • 4 layers58.4 × 32 mmPhase90, the printed circuit board in 3D

    Phase90

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    76 parts
  • 4 layers51.5 × 32 mmOverdrive, the printed circuit board in 3D

    Overdrive

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    44 parts
  • 4 layers76.2 × 40.6 mmPre Amp Stage, the printed circuit board in 3D

    Pre Amp Stage

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    44 parts
  • 4 layers47 × 106.3 mmDigital and recording, the printed circuit board in 3D

    Digital and recording

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    42 parts
  • 4 layers103.6 × 60.6 mmPower Amp Board, the printed circuit board in 3D

    Power Amp Board

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    32 parts
  • 4 layers132.1 × 101.6 mmPower Board, the printed circuit board in 3D

    Power Board

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    16 parts
  • 4 layers132.1 × 30.5 mmPower Board, the printed circuit board in 3D

    Power Board

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    13 parts
  • 4 layers149.9 × 20.3 mmPower Board, the printed circuit board in 3D

    Power Board

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    9 parts

Similar boards

  • 2 layers281.6 × 255.2 mmSynthia, the printed circuit board in 3D

    Synthia

    Engineering-House/Project-Synthia

    The programs used are as follows: - STMCube32MX - Visual Studio Code - STM32CubeIDE for Visual Studio Code (Extension Pack)

    236 parts
  • 4 layers60 × 36.5 mmStm8sx03k3-dev board, the printed circuit board in 3D

    Stm8sx03k3-dev board

    RalfsVetra/stm8sx03k3-dev-board

    Development board for the STM8SX03K3 platform.

    38 partsMIT
  • 2 layers25 × 30 mmFrancisco Câmara, the printed circuit board in 3D

    Francisco Câmara

    FranciscoCamara/PCB-Design-Course

    Course materials and projects for learning PCB design

    17 parts
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    jackw01/pi-tin

    Open source raspberry pi handheld retro gaming console

    129 parts75CERN-OHL-W-2.0
  • 2 layers90.2 × 66.5 mmPyControl DSeries, the printed circuit board in 3D

    PyControl DSeries

    Karpova-Lab/pyControl-D-Series-Breakout

    A breakout board for use with pyControl behavior control framework

    17 parts2
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    SophBG/pi-tin-mod

    Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…

    158 parts1
  • 4 layers150 × 39 mmBreakoutV1.0 removed solder paste, the printed circuit board in 3D

    BreakoutV1.0 removed solder paste

    danieltith/Neuroscience

    Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".

    93 parts
  • 4 layers96.7 × 114.1 mmBrucon hardware, the printed circuit board in 3D

    Brucon hardware

    jorisplusplus/brucon

    brucon badge

    702 parts

Questions

How big is the BigMuffRipOff PCB?

It measures 50.8 × 84 mm and has 4 copper layers, 1.6 mm thick.

What parts does the BigMuffRipOff use?

92 parts, built around the STM8L152K4T6, R-78E3.3-0.5, ADP7118AUJZ-4.5-R7 and NMJ6HFD2-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BigMuffRipOff KiCad files?

From the kyledenobel/RGA_Boards repository on GitHub, at the commit this page was made from: the board is BigMuffRipOff/Old Big Muff/BigMuffRipOff.kicad_pcb and its schematic Analog Controller/Analog Controller/Analog Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BigMuffRipOff design in my own project?

Its repository states no licence, so its author keeps all rights: ask kyledenobel before reusing the design.