

FireflyV0
PCB for the FireFly LED Controller
- Size
- 63.2 × 43.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 48
- Pads
- 130
- Tracks, vias
- 227, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 May 2022
- Updated
- 15 Aug 2025
Overview
FireflyV0 is an open-source printed circuit board by kylaro, from the kylaro/firefly-led-controller repository on GitHub. It is a 2-layer board of 63.2 × 43.1 mm with 21 parts on 48 nets, routed with 227 tracks and 10 vias.
It is built around the PEC12R-4215F-S0024, C0805C104M5RAC and USB4125-GF-A-0190, with the CMM-4737DT-26186-TR and PTV09A-4020F-B104 among its other parts. Its parts include 5 connectors, 3 capacitors, 2 resistors and 2 ICs. It belongs with the RP2040 boards of this library.
Main components
5PEC12R-4215F-S0024
插件-30℃~+70℃ 10mA 24/24 5V Incremental Right-Angle Support Two-phase output 插件 Rotary Encoders ROHSBournsRotary EncodersC0805C104M5RAC
0805100nF 50V X7R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTUSB4125-GF-A-0190
SMD-30℃~+85℃ 1 20 thousand cycles 3A 48V 6P Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB ConnectorsCMM-4737DT-26186-TR
-2V 58dB 860uA Omnidirectional Omnidirectional pickup - MEMS Microphones ROHSCUIMEMS MicrophonesPTV09A-4020F-B104
Through hole1 50mW ±20% Through hole Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable Resistors
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C0805C104M5RAC | SamacSys_Parts:CAPC2012X88N | C1, C2, C3 |
| 3 | USB4125-GF-A-0190 | SamacSys_Parts:USB4125GFA0190_nosilk | J1, J2, J3 |
| 2 | RC0805JR-071M6L | SamacSys_Parts:RESC2012X60N | R1, R2 |
| 2 | RESC2012X60N | SamacSys_Parts:RESC2012X60N | R**, R** |
| 2 | ledstrip_3pin_10mm | kylarLEDs:ledstrip_3pin_10mm | LEDS2, LEDS4 |
| 2 | ledstrip_3pin_5mm | kylarLEDs:ledstrip_3pin_5mm | LEDS1, LEDS3 |
| 1 | CMM-4737DT-26186-TR | SamacSys_Parts:CMM4737DT26186TR | MK1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | PEC12R-4215F-S0024 | SamacSys_Parts:PEC12R-4XXXF-SXXXX_court | U1 |
| 1 | PTV09A-4020F-B104 | SamacSys_Parts:PTV09A4020FB103 | VR1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH_removes2 | U2 |
The 20 most common of 21 parts.
More from kylaro/firefly-led-controller
6- 4 layers67.7 × 10.5 mm

- 4 layers70 × 10.5 mm

- 4 layers75 × 22 mm

- 4 layers58.3 × 26.2 mm

- 4 layers62 × 10.5 mm

- 4 layers58.3 × 26.2 mm

Similar boards
- 4 layers50.8 × 22.9 mm

Bald Sense Wing v3
baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing
63 parts9MIT - 2 layers119.4 × 96.5 mm

- 2 layers61.2 × 38.4 mm

- 2 layers60 × 70 mm

Media controller
bgb-0/media-controller
Open-source USB-C media controller. RP2040, 3× MX hot-swap keys, EC11 encoder, SSD1306 OLED. KiCad + QMK.
42 parts1GPL-2.0 - 2 layers117.1 × 60.5 mm

Power electronics2
volubepossum/flyback-converter
PCB design for the PE2 course at DTU.
48 partsLGPL-2.1 - 4 layers316 × 116 mm

Osc control layout
Takazudo/zudo-osc-hole-field
This directory retains the rejected #38 nine-board-era schematic, PCB and route receipts at base commit 1fc6e5347308fe5e8166d5828ba3ba6fa8e101c7. It is excluded from the current ten-board manifest.
454 parts - 2 layers93.8 × 39.5 mm

- 4 layers74 × 36.3 mm

Loudcardsdevice
gelotek-com/Anki-In-Hardware
Building a physical flashcard device inspired by Anki and spaced repetition.
87 parts2
Questions
How big is the FireflyV0 PCB?
It measures 63.2 × 43.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FireflyV0 use?
21 parts, built around the PEC12R-4215F-S0024, C0805C104M5RAC, USB4125-GF-A-0190 and CMM-4737DT-26186-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FireflyV0 KiCad files?
From the kylaro/firefly-led-controller repository on GitHub, at the commit this page was made from: the board is FireFlyV0/FireflyV0.kicad_pcb and its schematic FireFlyV0/FireflyV0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FireflyV0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kylaro before reusing the design.