
LevelSensor v2.0
lucasnoce/IC-LevelSensor_v2
Water level sensor with NBIoT data transmission

NB-IOT board using SIM7020E and MSP430G2553.
SIM7020E is an open-source printed circuit board by kycetin, from the kycetin/SIM7020E-Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 50 mm with 45 parts on 59 nets.
It is built around the SIM7020E and AMS1117-3.3. Its parts include 17 resistors, 11 capacitors, 6 transistors, 3 diodes and 3 connectors.
I am designing SIM7020E board using STM32.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R4, R5, R7, R9, R10, R12, R13 |
| 6 | 47K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R6, R8, R11, R14 |
| 6 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C4, C11 |
| 3 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C5, C6, C7 |
| 3 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9, C10 |
| 2 | 22 ohm | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15, R17 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 22ohm | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16 |
| 1 | 5.1 V 500 mW | Diode_SMD:D_SOD-323_HandSoldering | D2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Antenna | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | SIM7020E | SIM:SIM7020E | U1 |
| 1 | SIM_Card | Connector_Card:GCT_SIM8051-6-0-14-00-X-REVD | J2 |

lucasnoce/IC-LevelSensor_v2
Water level sensor with NBIoT data transmission


pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io


MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver


It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the SIM7020E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kycetin/SIM7020E-Board repository on GitHub, at the commit this page was made from: the board is SIM7020E/SIM7020E.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).