4 layers39 × 39 mm
OneInchEye
will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
94 parts355MIT
4 layers19 × 19 mm
This project provides hardware design for camera modules based on the IMX series chips, covering complete design files from schematics to PCB layout. It plans to extend support to more image sensor chips and offer additional hardware module designs. The project aims to foster hardware innovation and lower the development barrier.
- Size
- 19 × 19 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 48
- Pads
- 235
- Tracks, vias
- 316, 87
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Oct 2025
- Updated
- 20 Oct 2025
Overview
IMX415 is an open-source printed circuit board by kuku-199, from the kuku-199/OpenCamera-Hardware repository on GitHub. It is a 4-layer board of 19 × 19 mm with 36 parts on 48 nets, routed with 316 tracks and 87 vias.
It is built around the LP5907MFX-1.8. Its parts include 25 capacitors, 4 resistors, 3 ICs and 2 connectors.
Main components
1Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C6, C11, C16, C17, C18, C20, C21, C22, C23, C24, C25 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C7, C8, C9, C13, C14 |
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C19 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C12, C15 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 22R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | DF56C-26S-0.3V_51_ | Camrea_Library:DF56C26S03V51 | J2 |
| 1 | IMX415 | Camrea_Library:IMX415 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | NC | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | TLV70229_WSON6 | Package_SON:WSON-6_1.5x1.5mm_P0.5mm | U3 |
| 1 | TLV74311PDBVR | Camrea_Library:SOT95P280X145-5N | PS1 |
| 1 | ~ | Camrea_Library:Outline_19X19 | J1 |
Questions
How big is the IMX415 PCB?
It measures 19 × 19 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IMX415 use?
36 parts, built around the LP5907MFX-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IMX415 KiCad files?
From the kuku-199/OpenCamera-Hardware repository on GitHub, at the commit this page was made from: the board is IMX415/IMX415.kicad_pcb and its schematic IMX415/IMX415.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IMX415 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kuku-199 before reusing the design.
Similar boards
- 2 layers28.8 × 19.4 mm
UniAmp
Gmanmodz/U-AMP
Application program for LM49450 in C with PIC16LF15324. Digital audio configuration for Wii, PS2, and Dreamcast as well as analog audio input depending on jumper selection
47 parts27 - 6 layers69.3 × 111.8 mm
FMC MIPI v2
VideoGPU/FMC_MIPI
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface
143 parts22 - 6 layers60.6 × 100 mm
Gecko5education
logisim-evolution/GECKO5Education
Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education
311 parts18MIT - 4 layers20.3 × 68.6 mm
Carrier
samlittlewood/caravel_carrier
Carrier for efabless Caravel chip used for Google/Skywater 130nm shuttle program.
30 parts18MIT - 4 layers38 × 74 mm
Tympan Rev E
Tympan/Tympan_Rev_E_Hardware
Repository for Tympan Rev E Electronics and case designs
93 parts14MIT - 4 layers48 × 49 mm
ToF camera VGA
lnsru/melexis_VGA_ToF_camera
PCB design with the new MLX75027 VGA time of flight sensor
70 parts13 - 4 layers44.3 × 39 mm
Gmax4002-breakout
will127534/gmax4002-breakout
A basic minimum GMAX4002 breakout board for Raspberry Pi
142 parts12MIT