4 layers43.6 × 32.9 mm
Wii reg
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
94 parts77
2 layers28.8 × 19.4 mm
UniAmp
Gmanmodz/U-AMP27Application program for LM49450 in C with PIC16LF15324. Digital audio configuration for Wii, PS2, and Dreamcast as well as analog audio input depending on jumper selection
- Size
- 28.8 × 19.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 40
- Pads
- 137
- Tracks, vias
- 313, 39
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Nov 2019
- Updated
- 18 Apr 2020
Overview
UniAmp is an open-source printed circuit board by Gmanmodz, from the Gmanmodz/U-AMP repository on GitHub. It is a 2-layer board of 28.8 × 19.4 mm with 47 parts on 40 nets, routed with 313 tracks and 39 vias.
It is built around the PIC16F15324-I/P and LP5907MFX-1.8. Its parts include 13 capacitors, 6 resistors, 3 ICs and 3 connectors. It belongs with the PIC boards of this library.
Main components
2
PIC16F15324-I/P
PDIP-14-40℃~+85℃ 10bit 12 2.3V~5.5V 32MHz 512Byte 5bit 7KB 8 Bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LP5907MFX-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 120mV@(250mA) 12uA 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | TestPoint | Wiiboy Parts:1.25mm pad | TP1, TP2, TP3, TP4, TP5, TP6, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19 +3 |
| 13 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 6 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
| 2 | Conn_01x02_Female | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J1, J2 |
| 1 | Audio-pcb-rescue_LM49450-Wiiboy_parts | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U2 |
| 1 | Conn_01x05_Female | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J3 |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | PIC16F15324 | Package_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm | U1 |
The 44 most common of 47 parts.
Questions
How big is the UniAmp PCB?
It measures 28.8 × 19.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UniAmp use?
47 parts, built around the PIC16F15324-I/P and LP5907MFX-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UniAmp KiCad files?
From the Gmanmodz/U-AMP repository on GitHub, at the commit this page was made from: the board is UAMP PCB FILES/UniAmp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UniAmp design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gmanmodz before reusing the design.
Similar boards
- 2 layers30.5 × 16.5 mm
Tymkrs Cyphercon 2020 IRhack
Wireb/Cyphercon-5_3-2022
Files related to the Cyphercon 5.3 2022 badges and support equipment.
17 parts4MIT - 4 layers39 × 39 mm
OneInchEye
will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
94 parts355MIT - 6 layers69.3 × 111.8 mm
FMC MIPI v2
VideoGPU/FMC_MIPI
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface
143 parts22 - 6 layers60.6 × 100 mm
Gecko5education
logisim-evolution/GECKO5Education
Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education
311 parts18MIT - 4 layers20.3 × 68.6 mm
Carrier
samlittlewood/caravel_carrier
Carrier for efabless Caravel chip used for Google/Skywater 130nm shuttle program.
30 parts18MIT - 4 layers38 × 74 mm
Tympan Rev E
Tympan/Tympan_Rev_E_Hardware
Repository for Tympan Rev E Electronics and case designs
93 parts14MIT - 4 layers48 × 49 mm
ToF camera VGA
lnsru/melexis_VGA_ToF_camera
PCB design with the new MLX75027 VGA time of flight sensor
70 parts13