

Audioplayer
Hardware files for the kitzune project
- Size
- 62.7 × 35.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 108
- Pads
- 380
- Tracks, vias
- 612, 127
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Aug 2026
- Updated
- 31 Aug 2026
Overview
Audioplayer is an open-source printed circuit board by kscz, from the kscz/kitzune-hw repository on GitHub. It is a 4-layer board of 62.7 × 35.5 mm with 79 parts on 108 nets, routed with 612 tracks and 127 vias.
It is built around the MAX9867ETJ+, AP2112K-1.8 and AP2112K-3.3, with the S8050, DMG3415U and MBR0540 among its other parts. Its parts include 31 resistors, 27 capacitors, 7 ICs, 5 switches and 4 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
6MAX9867ETJ+
TQFN-32(5x5)-40℃~+85℃ 1.65V~1.95V、1.65V~3.6V 8kHz~48kHz Encoder/decoder Serial、I2C TQFN-32(5x5) Audio Interface ICs ROHSMaxim Integrated (Analog Devices)Audio Interface ICsAP2112K-1.8
SOT251.8V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)DMG3415U
SOT-23MOSFETsTECH PUBLICMBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdSummary
This is a bunch of kicad files you'll need if you want to build your own Kitzune! See https://github.com/kscz/kitzune for the software to go with this.
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C7, C8, C9, C10, C12, C15, C16, C19, C22, C27 |
| 10 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C11, C13, C17, C18, C20, C21 |
| 8 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R4, R15, R26, R27, R28, R29, R30 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R8, R9, R10, R11, R12, R31 |
| 6 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R6, R7, R17, R18 |
| 5 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1, SW2, SW3, SW4, SW5 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25, C26 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R24, R25 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric | R13, R19 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 390k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | AP2112K-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AudioJack4 | audioplayer:SJ-4351x | J3 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U7 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | DMG3415U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP32-PICO-MINI-02 | PCM_Espressif:ESP32-PICO-MINI-02 | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MAX9867 | Package_DFN_QFN:TQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm | U4 |
| 1 | MBR0540 | Diode_SMD:D_SOD-123 | D2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Micro_SD_Card_Det2 | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 1 | ~ | audioplayer:UG-2864HSWEG01_0.96IN_WRAPAROUND | U5 |
Similar boards
- 6 layers69.7 × 22.9 mm

- 6 layers60.6 × 100 mm

CpuAddOn
logisim-evolution/GECKO5Education
Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education
141 parts18MIT - 2 layers100 × 56.8 mm

JoyKey
techy-robot/JoyKey
A small macropad that simultaneously acts as game controller and an entertainment device.
64 parts1CERN-OHL-S-2.0 - 4 layers84 × 25.6 mm

Little Helper
wolkstein/minimal-esp32-ble-midi-ctrl
A simple Bluthooth Midi DAW transport control unit based on an esp32 mc
41 parts1GPL-3.0 - 4 layers70 × 50 mm

Finalized bluetooth remote
3pnguyen/esp32-bluetooth-media-keyboard
Electronic project that provides the same control as wireless earbuds.
62 partsMIT - 2 layers54.9 × 23.5 mm

- 2 layers81.3 × 99.8 mm

- 4 layers50.8 × 62.2 mm

Dice Roller SAMD
Joejoedesu/DiceRoller
It is a Dice Roller Blessed by Nahida! Wish you all the wisdom and fortune.
65 parts
Questions
How big is the Audioplayer PCB?
It measures 62.7 × 35.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Audioplayer use?
79 parts, built around the MAX9867ETJ+, AP2112K-1.8, AP2112K-3.3 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Audioplayer KiCad files?
From the kscz/kitzune-hw repository on GitHub, at the commit this page was made from: the board is audioplayer.kicad_pcb and its schematic audioplayer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Audioplayer design in my own project?
Its repository states no licence, so its author keeps all rights: ask kscz before reusing the design.