
V25Panel
maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32

It is a Dice Roller Blessed by Nahida! Wish you all the wisdom and fortune.
Dice Roller SAMD is an open-source printed circuit board by Joejoedesu, from the Joejoedesu/DiceRoller repository on GitHub. It is a 4-layer board of 50.8 × 62.2 mm with 65 parts on 77 nets, routed with 408 tracks and 86 vias.
It is built around the ATSAMD51J20A-AU, QSB34CGR and MC3479, with the MCP73831T-2ACI/OT-HXY, DMG3415U and MBR0540 among its other parts. Its parts include 23 resistors, 14 capacitors, 5 ICs, 3 diodes and 3 connectors. It belongs with the SAM D and SAM boards of this library.
It is a Dice Roller Blessed by Nahida! Wish you all the wisdom and fortune.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R7, R8, R9, R15, R16, R17, R18, R22, R23 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C10, C12, C13 |
| 5 | 10uF | MC3479:G-21_MUR | C1, C2, C3, C7, C11 |
| 5 | 4.7K | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14 |
| 5 | ~ | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | RST1, SW2, SW3, SW4, SW5 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R6, R20, R21 |
| 3 | 5.1K | Resistor_SMD:R_0603_1608Metric | R2, R3, R5 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | ORANGE | LED_SMD:LED_0603_1608Metric | CHG1, CHG3 |
| 2 | RED | LED_SMD:LED_0603_1608Metric | CHG2, L2 |
| 2 | TESTPOINTROUND1.5MM | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 10uH | Capacitor_SMD:C_0805_2012Metric | L1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 25Q16 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 32.768 | MC3479:XTAL_ECS-31B_ECS | X2 |
| 1 | AP2112-3.3 | MC3479:SOT_RG1_DIO | U4 |
| 1 | ATSAMD51J20A-A | Package_QFP:TQFP-64_10x10mm_P0.5mm | U1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J2 |
| 1 | DMG3415 | MC3479:SOT95P240X105-3N | Q1 |
| 1 | JSTPH | MC3479:CONN2_B2B-PH-K-S_JST | X1 |
| 1 | LOGO | Nahida:nahida_yes | G*** |
| 1 | MBR054 | Diode_SMD:D_SOD-123 | D1 |
| 1 | MC3479 | MC3479:MC3479_MEM | U5 |
| 1 | MCP73831T-2ACI/OT | MC3479:SOT-23-5_MC_MCH | U3 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | QSB34CGR | MC3479:XDCR_QSB34CGR | D2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | ~ | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED1 |

maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32


malikhubb/Oversoon
Custom PCB design for geolocation sensing, wifi communications, and LED display

Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.


rvadhavk/ble-angle-guide
To build and debug, run cargo run --release from the firmware directory. Note: the CPU seems to hardfault after some time if running without the --release flag.


techy-robot/JoyKey
A small macropad that simultaneously acts as game controller and an entertainment device.
It measures 50.8 × 62.2 mm and has 4 copper layers, 1.77 mm thick.
65 parts, built around the ATSAMD51J20A-AU, QSB34CGR, MC3479 and MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Joejoedesu/DiceRoller repository on GitHub, at the commit this page was made from: the board is Dice_Roller_SAMD/Dice_Roller_SAMD.kicad_pcb and its schematic Dice_Roller_SAMD/Dice_Roller_SAMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Joejoedesu before reusing the design.