
Mobile Camera
- Size
- 62 × 87 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 153
- Pads
- 448
- Tracks, vias
- 600, 172
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Nov 2023
- Updated
- 28 Dec 2023
Overview
Mobile Camera is an open-source printed circuit board by krzy3chu, from the krzy3chu/PUEiE-PCB repository on GitHub. It is a 2-layer board of 62 × 87 mm with 85 parts on 153 nets, routed with 600 tracks and 172 vias.
It is built around the STM32H753VIT6, SIM800C and TPS628511DRL, with the TPS628513DRL, MIC5205YM5 and ESDA6V1-5SC6 among its other parts. Its parts include 34 capacitors, 23 resistors, 6 ICs, 6 connectors and 5 diodes. It belongs with the STM32 boards of this library.
Main components
6STM32H753VIT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 1MB 2MB 32 Bit 480MHz 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)SIM800C
SMD,17.6x15.7mm3.4V~4.4V CMUX功能、噪声抑制功能、USSD功能 GPRS、GSM UART、GPIO、ADC、SIM card SMD,17.6x15.7mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G ModulesTPS628511DRL
SOT-583-40℃~+150℃@(TJ) 1 17uA 1A 2.25MHz 2.7V~6V 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS628513DRL
SOT-583-40℃~+150℃@(TJ) 1 2.25MHz 2.7V~6V 3A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMIC5205YM5
SOT-23-5-40℃~+125℃ 1 1.242V~15.65V 150mA 150uA 16V 350mV@(150mA) Adjustable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsESDA6V1-5SC6
SOT-23-6100nA 10A@8/20us 11V、14V 140W@8/20us 5V 60pF 9V ESD IEC 61000-4-2、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6, C7, C8, C10, C13, C14, C20 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C26, C27, C30 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15, R17 |
| 3 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C25, C29 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R22, R23 |
| 3 | 51 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11 |
| 2 | 2.2uF_tantalum | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32, C34 |
| 2 | 220nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C19 |
| 2 | 470nH | Inductor_SMD:L_Vishay_IHLP-1616 | L1, L2 |
| 2 | 470pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C33 |
| 2 | 5pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 2 | 680pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C28 |
| 2 | MIC5205YM5 | Package_TO_SOT_SMD:SOT-23-5 | U5, U6 |
| 1 | 1.40k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_5x5.4 | C15 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 13.0k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 16.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 19.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 1uF | Capacitor_SMD:CP_Elec_4x5.4 | C9 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 30.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 33pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 5.1V | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 5.6K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 562k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 6.2V | Diode_SMD:D_SOD-323_HandSoldering | D5 |
| 1 | 88.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | Antenna_connector | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J4 |
| 1 | Crystal | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | DVP_24_pin | Connector_FFC-FPC:TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J2 |
| 1 | ESDA6V1-5SC6 | Package_TO_SOT_SMD:SOT-23-6 | D4 |
| 1 | LED_B | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED_G | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Micro_SD_card | Connector_Card:microSD_HC_Wuerth_693072010801 | J3 |
| 1 | Micro_SIM_card | Connector_Card:microSIM_JAE_SF53S006VCBR2000 | J5 |
| 1 | Polyfuse_3A | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | Q_NPN | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | SIM800C | RF_GSM:SIMCom_SIM800C | U2 |
| 1 | STM32H753VIT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SWD_header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SW_Power_On | Button_Switch_SMD:SW_SPST_Omron_B3FS-101xP | SW1 |
| 1 | SW_Reset | Button_Switch_SMD:SW_SPST_Omron_B3FS-101xP | SW2 |
| 1 | TPS628511 | TSP62851x:SOT-583 | U3 |
| 1 | TPS628513 | TSP62851x:SOT-583 | U4 |
| 1 | USB_C_receptacle | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J6 |
Similar boards
- 4 layers48 × 50 mm

- 2 layers90 × 90 mm

- 4 layers73 × 98 mm

ALBERT FLIGHTCOMPUTER
felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.
161 partsMIT - 4 layers65 × 30 mm

Chronos phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
26 parts2 - 4 layers120 × 80 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
23 parts - 2 layers57.9 × 67.9 mm

- 2 layers70.9 × 45.6 mm

- 2 layers43.2 × 58.4 mm

NivelesDeNivelesSensor
notaroomba/nivelesdeniveles
An early warning application made with React Native.
6 parts2
Questions
How big is the Mobile Camera PCB?
It measures 62 × 87 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mobile Camera use?
85 parts, built around the STM32H753VIT6, SIM800C, TPS628511DRL and TPS628513DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mobile Camera KiCad files?
From the krzy3chu/PUEiE-PCB repository on GitHub, at the commit this page was made from: the board is Mobile_Camera.kicad_pcb and its schematic Mobile_Camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mobile Camera design in my own project?
Its repository states no licence, so its author keeps all rights: ask krzy3chu before reusing the design.