4 layers80.9 × 66.5 mm
Schema
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
81 parts
2 layers70 × 60 mm
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
- Size
- 70 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 41
- Pads
- 80
- Tracks, vias
- 84, 12
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 May 2026
- Updated
- 29 May 2026
Overview
Manette is an open-source printed circuit board by Krypthick, from the Krypthick/Prototype-Bras-Continuum repository on GitHub. It is a 2-layer board of 70 × 60 mm with 22 parts on 41 nets, routed with 84 tracks and 12 vias.
It is built around the ESP32-DEVKITC-32E, AMS1117-3.3 and CL21B106KOQNNNE, with the RMCF0805JT330R, PH1RB-05-UA and LTST-C171KGKT among its other parts. Its parts include 4 resistors, 3 switches, 2 capacitors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-DEVKITC-32E
-- ModulesEspressif SystemsModules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CL21B106KOQNNNE
080510uF 16V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
RMCF0805JT330R
0805-55℃~+155℃ 125mW 150V 330Ω Thick Film Resistor ±200ppm/℃ ±5% 0805 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountPH1RB-05-UA
弯插,P=2.54mm-40℃~+105℃ 1 1x5P 2.54mm 2.5mm 250V 3A 5P 6mm Black Brass Gold Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSADAM TECHPin Headers
LTST-C171KGKT
0805-55℃~+85℃ 130° 20mA 2V 35mcd 571nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
JS102011SAQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 6V 9mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide Switches
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Close | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 1 | ESP32-DEVKITC-32E | Footprints:MODULE_ESP32-DEVKITC-32E | U2 |
| 1 | Joystick | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Open | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | Powah | Footprints:TE_640456-2 | J2 |
| 1 | SW_SPDT | Footprints:SW_JS102011SAQN | SW1 |
More from Krypthick/Prototype-Bras-Continuum
3- 2 layers92 × 82 mm
DriverBoard
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
39 parts - 2 layers24 × 24 mm
GyroscopeBoard
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
12 parts
Similar boards
- 2 layers102 × 103 mm
- 2 layers260.4 × 118.7 mm
- 2 layers80 × 47.5 mm
Water sample collector iot main
TheTesla/HTW-Water-Sample-Collector
Coolecting water samples during flood events and send notify message
81 parts - 2 layers76.2 × 25.4 mm
- 2 layers90 × 108 mm
PCB For ACC FOTA Graduation Project
ZyadAyman896/PCB-For-ACC-FOTA-Graduation-Project
My PCB design for our graduation's project .
26 parts - 2 layers50 × 75 mm
- 2 layers85 × 98 mm
- 2 layers82.5 × 82.5 mm
EPS V1
BrownSpaceEngineering/PVDX-EPS_V1
Avionics files related to new overhauled EPS schematics, pcb design, and documentation
197 parts
Questions
How big is the Manette PCB?
It measures 70 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Manette use?
22 parts, built around the ESP32-DEVKITC-32E, AMS1117-3.3, CL21B106KOQNNNE and RMCF0805JT330R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Manette KiCad files?
From the Krypthick/Prototype-Bras-Continuum repository on GitHub, at the commit this page was made from: the board is Schemas/Manette/Manette.kicad_pcb and its schematic Schemas/DriverBoard/DriverBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Manette design in my own project?
Its repository states no licence, so its author keeps all rights: ask Krypthick before reusing the design.