2 layers22 × 32 mm
Stacja pogodowa
rryske2001/weather-station
Projekt zaawansowanej, bezprzewodowej stacji pogodowej podzielonej na moduł bazowy (wyświetlacz) oraz zdalny węzeł czujnikowy.
14 parts
2 layers85 × 98 mm
Project ornament
Boogami/PCB-ornamentChristmas ornament - version 2024
- Size
- 85 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 23
- Pads
- 88
- Tracks, vias
- 227, 45
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Dec 2024
- Updated
- 24 Dec 2024
Overview
Project ornament is an open-source printed circuit board by Boogami, from the Boogami/PCB-ornament repository on GitHub. It is a 2-layer board of 85 × 98 mm with 29 parts on 23 nets, routed with 227 tracks and 45 vias.
It is built around the ATTINY414-SSN and LTST-C171KGKT. Its parts include 12 diodes, 8 resistors, 2 capacitors, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY414-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 128Byte 20MHz 256Byte 4KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LTST-C171KGKT
0805-55℃~+85℃ 130° 20mA 2V 35mcd 571nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
README
README.mdChristmas PCB ornament 🎄🎁🎅🏻
This project features a unique Christmas-themed printed circuit board (PCB) ornament. The ornament is composed of two distinct parts: a red colored PCB and a laser-cut wooden overlay. The PCB, serves as the background and is embellished with festive graphics, including bells and a prominent snowflake design. The wooden overlay, precisely laser-cut, frames the PCB and includes decorative elements such as mistletoe leaves and berries, adding a touch of traditional holiday charm. This innovative blend of technology and traditional holiday motifs makes for a distinctive and eye-catching Christmas ornament.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LTST-C171KGKT | digikey-footprints:0805 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 4 | 100Ω | JLCPCB-Kicad-Footprints:R_0805 | R5, R6, R7, R8 |
| 2 | 10k | SparkFun-Resistor:R_0603_1608Metric | R2, R3 |
| 1 | 1.0uF | SparkFun-Capacitor:C_0805_2012Metric | C1 |
| 1 | 22uF | JLCPCB-Kicad-Footprints:C_0805 | C2 |
| 1 | 2kΩ | JLCPCB-Kicad-Footprints:R_0603 | R1 |
| 1 | 4.7k | SparkFun-Resistor:R_0603_1608Metric | R4 |
| 1 | ATtiny414-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | Antenna_Loop | agg:Antenna_38000000x30000000mm | AE2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Multicomp_BC-2001_1x2032 | BT1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | UART Connector | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J2 |
| 1 | UPDI Connector | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J1 |
| 1 | ~ | PCM_Package_SO_AKL:TSSOP-8_3x3mm_P0.65mm | U1 |
Similar boards
- 2 layers35 × 44 mm
- 2 layers
AtTiny lcd
GerardZ/AFLII
This is a replacement for the PCF8574 LCD-interface board, which is pin but not API compatible.
8 parts - 2 layers98.9 × 117.7 mm
Ornament
madcow4242/Arduino-Ornament
Arduino ATTiny414 (814/1614/424/824/1624/3224) powered 30-LED programmable Christmas Ornament (or badge, etc.)
55 parts - 2 layers100 × 34 mm
7clock
Quard/7clock
Simple budget clock using 7 segment display with cheap PIC microcontroller and RTC chip
59 partsMIT - 2 layers541 × 25 mm
- 2 layers48.5 × 81.8 mm
- 2 layers75 × 40 mm
Vfddriver
ansemjo/chronovfd
hardware project for a clock around a russian ivl2-5/7 vfd and an esp32-wroom module
37 parts13CERN-OHL-P-2.0
Questions
How big is the Project ornament PCB?
It measures 85 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project ornament use?
29 parts, built around the ATTINY414-SSN and LTST-C171KGKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project ornament KiCad files?
From the Boogami/PCB-ornament repository on GitHub, at the commit this page was made from: the board is pcb part/project-ornament/project-ornament.kicad_pcb and its schematic pcb part/project-ornament/project-ornament.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project ornament design in my own project?
Its repository states no licence, so its author keeps all rights: ask Boogami before reusing the design.