

Dot projector
Stereo Vision Quadcopter
- Size
- 26 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 5
- Pads
- 18
- Tracks, vias
- 16, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Oct 2022
- Updated
- 3 Apr 2023
Overview
Dot projector is an open-source printed circuit board by Kronos3, from the Kronos3/stereo-heli repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 26 × 10 mm with 7 parts on 5 nets, routed with 16 tracks and 1 via.
It is built around the BS170. Its parts include 2 resistors, 1 diode, 1 transistor and 1 connector.
Main components
1README
README.mdstereo-heli
Stereo Vision Quadcopter
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 9 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | BS170 | digikey-footprints:TO-92-3 | Q1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LASER | cad:BELICE-850 | D1 |
More from Kronos3/stereo-heli
1- 4 layers

Similar boards
- 2 layers21.1 × 26.9 mm

- 2 layers94.6 × 46.1 mm

- 2 layers97.1 × 97 mm

- 2 layers121 × 68 mm

Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers167.6 × 97.5 mm

AS3397 proto DIP
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
142 parts88MIT - 2 layers70 × 55 mm

- 2 layers

T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 2 layers71.1 × 24.1 mm

Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57
Questions
How big is the Dot projector PCB?
It measures 26 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dot projector use?
7 parts, built around the BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dot projector KiCad files?
From the Kronos3/stereo-heli repository on GitHub, at the commit this page was made from: the board is Hardware/DotProjector/dot_projector/dot_projector.kicad_pcb and its schematic Hardware/DotProjector/dot_projector/dot_projector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dot projector design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).