

Pcb1 v1
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 59
- Pads
- 136
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 11 Mar 2017
- Updated
- 28 Apr 2017
Overview
Pcb1 v1 is an open-source printed circuit board by kristophertab, from the kristophertab/pcb_robot repository on GitHub. It is a 2-layer board with 31 parts on 59 nets.
It is built around the LF33ABDT-TR and LM7812. Its parts include 10 capacitors, 9 diodes, 6 ICs, 5 connectors and 1 fuse. It belongs with the STM32 boards of this library.
Main components
2LF33ABDT-TR
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 16V 3.3V 350mV@(200mA) 500mA 500uA 50uVrms 80dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM7812
TO-263TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIUncategorised
README
README.mdPCB do robota
Płytka z mcu, optoizolowanym połączeniem uart, połączeniem st-link, kilkoma poziomami zasilania. Ma za zadanie sterować odczytywać dane z enkoderów i sterować, przez mostki, pracą silników
Schemat

PCB
Górna warstwa:

Dolna warstwa:

Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diodes_THT:D_T-1_P5.08mm_Horizontal | D2, D3, D4, D5, D6, D7, D8, D9 |
| 4 | 100n | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C7, C8, C9, C10 |
| 2 | 0.1u | Discret:CP5 | C2, C4 |
| 2 | 0.33u | Discret:CP5 | C1, C3 |
| 2 | HL293D | MyLib:HL293D | U5, U6 |
| 1 | 0.1u | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C5 |
| 1 | 2.2u | Discret:CP5 | C6 |
| 1 | 7805 | TO_SOT_Packages_THT:TO-220_Vertical | U3 |
| 1 | D_Zener | Diodes_THT:D_T-1_P5.08mm_Horizontal | D1 |
| 1 | Fuse | Fuse_Holders_and_Fuses:Fuse_CB61F | F1 |
| 1 | LF33ABDT-TR | TO_SOT_Packages_SMD:TO-252-2Lead | U4 |
| 1 | LM7812 | TO_SOT_Packages_THT:TO-220_Vertical | U1 |
| 1 | M1 A | Connectors:PINTST | P2 |
| 1 | M1 B | Connectors:PINTST | P3 |
| 1 | M2 A | Connectors:PINTST | P4 |
| 1 | M2 B | Connectors:PINTST | P5 |
| 1 | STM32F030C6Tx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | UART GND, Tx, Rx | Connectors:Wafer_Vertical10x5.8x7RM2.5-3 | P1 |
More from kristophertab/pcb_robot
2- 2 layers49.5 × 49.5 mm

- 2 layers

Similar boards
- 2 layers58.5 × 58.5 mm

- 2 layers65 × 45 mm

- 4 layers64 × 28.8 mm

- 2 layers104.1 × 76.2 mm

- 2 layers43 × 35 mm

LYFT CTRL
mgkoenig/lyft
LYFT is a sophisticated remote control for your IKEA BEKANT desk.
43 parts88GPL-3.0 - 2 layers167.6 × 97.5 mm

AS3397 proto DIP
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
142 parts88MIT - 2 layers99.1 × 99.1 mm

Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 4 layers150 × 100 mm

Questions
What parts does the Pcb1 v1 use?
31 parts, built around the LF33ABDT-TR and LM7812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb1 v1 KiCad files?
From the kristophertab/pcb_robot repository on GitHub, at the commit this page was made from: the board is pcb1_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb1 v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kristophertab before reusing the design.