
DronePCB
nickzentmayer/EE300W-R6Drone
Repository containing all code and CAD design files for EE300W project SP26

ESP32 Addressable LED Controller
LED Lamp V2 is an open-source printed circuit board by NiQu05, from the NiQu05/esp32_mqtt_led repository on GitHub. It is a 4-layer board of 64 × 28.8 mm with 52 parts on 51 nets, routed with 472 tracks and 155 vias.
It is built around the ESP32-C3-WROOM-02-N4, LM61495Q5RPHRQ1 and CYPD3177-24LQXQT, with the DMP3098LSD-13-VB, LF33ABDT-TR and PA4343.272NLT among its other parts. Its parts include 25 capacitors, 16 resistors, 3 ICs, 1 transistor and 1 inductor. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
This project includes PCB- and casing design files well as the firmware for an ESP32 based addressable LED controller.
The core of the design is based around the ESP32-C3 which handles data transmission and signal generation for the LED's. The device is powered by USB-PD over USB-C. The LED's are power hungry and require 5V to operate but USB-PD can only deliver 3A. The controller therefore negotiates 15V at 3A and steps this down to 5V using a switching regulator ensuring sufficient power at the required voltage.
The controller is designed to be used as an MQTT-Client device subscribing to one or more topics. Here the device receives and parses JSON payloads setting static colors or predefined animations.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 2k2 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R9, R10, R11, R12, R13, R15, R16 |
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C6, C8, C9, C11, C18, C21, C25 |
| 6 | 0u47 | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16, C17, C22, C23 |
| 6 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C7, C10, C24 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C12, C13 |
| 2 | 47u | Capacitor_SMD:C_1210_3225Metric | C19, C20 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_ISO14580_Pad_TopBottom | H1, H2 |
| 1 | 0436500300 | Footprints:MOLEX_0436500300 | LEDS |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | CYPD3177-24LQXQT | Footprints:QFN24_CYPD3177-24LQXQT_INF | U2 |
| 1 | DMP3098LSD-13 | Footprints:SOIC127P600X175-8N | Q1 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | ESP32-C3-WROOM-02-N4 | Footprints:MODULE_ESP32-C3-WROOM-02-H4 | U1 |
| 1 | LF33ABDT-TR | Footprints:DPAK_STM | CR1 |
| 1 | LM61495Q5RPHRQ1 | Footprints:LM61495Q5RPHRQ1 | U3 |
| 1 | PA4343.272NLT | Footprints:INDPM140128X650N | L1 |
| 1 | RS-032G05A3-SMRT | Footprints:SW_RS-032G05A3-SMRT | RST |
| 1 | USB4105-GF-A | Footprints:GCT_USB4105-GF-A | USB |

nickzentmayer/EE300W-R6Drone
Repository containing all code and CAD design files for EE300W project SP26

wallComputer/PiZumo_Robot
Git Folder to share hardware and software files for PiZumo Robot.



swagprincess/coilonplug
Dwell converter/shaper for a stock ECU COP conversion on a Miata



It measures 64 × 28.8 mm and has 4 copper layers, 1.6 mm thick.
52 parts, built around the ESP32-C3-WROOM-02-N4, LM61495Q5RPHRQ1, CYPD3177-24LQXQT and DMP3098LSD-13-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NiQu05/esp32_mqtt_led repository on GitHub, at the commit this page was made from: the board is PCB/LED Lamp V2.kicad_pcb and its schematic PCB/LED Lamp V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NiQu05 before reusing the design.