2 layers30.2 × 53.5 mm
2 layers89 × 50 mm
Oven
Kreyl/OvenSoldering oven
- Size
- 89 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 84
- Pads
- 372
- Tracks, vias
- 2,384, 226
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Apr 2016
- Updated
- 27 Jun 2016
Overview
Oven is an open-source printed circuit board by Kreyl, from the Kreyl/Oven repository on GitHub. It is a 2-layer board of 89 × 50 mm with 99 parts on 84 nets, routed with 2,384 tracks and 226 vias.
It is built around the MCP3551-E/MS, ST1S10PHR and STMPE811Q, with the BLM15AG102SN1, SS14 and NCP583SQ28 among its other parts. Its parts include 42 capacitors, 23 resistors, 5 inductors, 3 diodes and 2 fuses. It belongs with the STM32 boards of this library.
Main components
7
MCP3551-E/MS
MSOP-8-40℃~+125℃ 1 112.64kHz 120uA 13.75Hz 2.7V~5.5V 22 Auto calibration、Power-on reset、Integrated modulator、Built-in digital filter Built-in External Not supported SPI Sigma-Delta Yes MSOP-8 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
ST1S10PHR
SOIC-8-EP-25℃~+125℃ 1 1.5mA 2.5V~18V 3A 800mV~13.6V 900kHz~1.2MHz Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHSSTMicroelectronicsDC-DC Converters
STMPE811Q
QFN-16-EP(3x3)QFN-16-EP(3x3) Touch Sensors ROHSSTMicroelectronicsTouch Sensors
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
NCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NSS20101J
SC-89-3-55℃~+150℃ 1 NPN 100nA 15mV 1A 200 20V 255mW 350MHz 6V NPN SC-89-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 0.1u | Capacitors:CAP_0603 | C2, C3, C12, C13, C14, C15, C16, C17, C20, C23, C25, C29, C30, C31, C32, C34 +9 |
| 7 | 1u | Capacitors:CAP_0603 | C9, C10, C11, C18, C33, C37, C41 |
| 5 | 1k | Resistors:RES_0603 | R5, R6, R7, R8, R12 |
| 4 | 100R | Resistors:RES_0603 | R17, R18, R19, R20 |
| 4 | 10u | Capacitors:CAP_0603 | C24, C26, C27, C28 |
| 4 | BLM15AG102 | Inductors:IND_0402 | L1, L2, L4, L5 |
| 4 | HOLE_METALLED | PCB:Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 3 | 10k | Resistors:RES_0603 | R13, R16, R21 |
| 3 | SS14 | Diodes:SMA_DO214AC | D1, D2, D3 |
| 2 | 10n | Capacitors:CAP_0603 | C1, C42 |
| 2 | 18pF | Capacitors:CAP_0603 | C21, C22 |
| 2 | 1k 5% | Resistors:RES_0603 | R1, R3 |
| 2 | 220u | Capacitors:CAP_05xxR_horiz | C8, C19 |
| 2 | 4k7 | Resistors:RES_0603 | R14, R15 |
| 2 | CONN_4 | Connectors:WB-04(MW-4M) | XL4, XL5 |
| 2 | Fuse0R | Resistors:RES_0603_FUSE | F1, F2 |
| 2 | MCP3551 | SO_DIL_TSSOP:SO8_150MIL | DA1, DA2 |
| 2 | NCP583SQ | SOT:SC82AB | DA3, DA5 |
| 1 | 10k 0.1% | Resistors:RES_0603 | R2 |
| 1 | 10k0.1% | Resistors:RES_0603 | R4 |
| 1 | 10uH | Inductors:IND_SDR0604 | L3 |
| 1 | 12MHz | Quartz:0503x4-4 | XTAL1 |
| 1 | 1M | Resistors:RES_0603 | R22 |
| 1 | 24C08 | SO_DIL_TSSOP:SO8_150MIL | DD2 |
| 1 | 30k | Resistors:RES_0603 | R9 |
| 1 | 390R | Resistors:RES_0603 | R11 |
| 1 | 5.1k | Resistors:RES_0603 | R10 |
| 1 | 51R | Resistors:RES_0603 | R23 |
| 1 | BUTTON6x6 | BtnsSwitches:BTN_6x6 | SW1 |
| 1 | CONN_2 | Connectors:WB-02(MW-2M) | XL6 |
| 1 | CONN_2 | Connectors:MINIFIT2x1_S_VERT | XL2 |
| 1 | CONN_2 | Connectors:W02_Pitch_2d54 | XL8 |
| 1 | CONN_6 | Connectors:PLS-6 | XL1 |
| 1 | ER-TFT024 | Connectors:ER-CON50HT-1 | U1 |
| 1 | Logo | Pictures:Ostranna_16d9_13d5 | Logo1 |
| 1 | NSS20101 | SOT:SC89-3 | Q1 |
| 1 | ST1S10 | QFN_DFN:DFN8 | DA4 |
| 1 | STM32L476Rx | LQFP_TQFP:LQFP64 | DD1 |
| 1 | STMPE811 | QFN_DFN:QFN16_4x4_H | DD3 |
| 1 | USB_B | Connectors:USB_B | XL3 |
Questions
How big is the Oven PCB?
It measures 89 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Oven use?
99 parts, built around the MCP3551-E/MS, ST1S10PHR, STMPE811Q and BLM15AG102SN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oven KiCad files?
From the Kreyl/Oven repository on GitHub, at the commit this page was made from: the board is Oven_hw/Oven.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oven design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.
Similar boards
- 2 layers45 × 79.5 mm
- 2 layers75.7 × 37.5 mm
- 2 layers60 × 76 mm
- 2 layers114 × 62 mm
- 2 layers60 × 79 mm
LedBandRadio
Kreyl/LedBandRadio
MCU+Radio868 with F antenna + powerful BUCK (12 to 5) + 3x switch for RGB LED band + connector for WS2812 band
104 parts - 2 layers78.7 × 70 mm
- 2 layers63 × 162 mm
