2 layers114 × 62 mm
2 layers60 × 76 mm
AlienDetector
Kreyl/AlienDetector- Size
- 60 × 76 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 69
- Pads
- 318
- Tracks, vias
- 2,081, 231
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Jan 2018
- Updated
- 9 Apr 2018
Overview
AlienDetector is an open-source printed circuit board by Kreyl, from the Kreyl/AlienDetector repository on GitHub. It is a 2-layer board of 60 × 76 mm with 75 parts on 69 nets, routed with 2,081 tracks and 231 vias.
It is built around the CC2500RGP, STMPE811Q and BLM15AG102SN1, with the MMBT2222 and PMEG2020EH among its other parts. Its parts include 36 capacitors, 10 resistors, 6 inductors, 1 IC and 1 diode. It belongs with the STM32 boards of this library.
Main components
5
CC2500RGP
QFN-20-EP(4x4)-104dBm -40℃~+85℃ 1.8V~3.6V 13.3mA 1dBm 2.4GHz 2.4GHz~2.4835GHz 21.5mA 500Kbps ISM SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
STMPE811Q
QFN-16-EP(3x3)QFN-16-EP(3x3) Touch Sensors ROHSSTMicroelectronicsTouch Sensors
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
MMBT2222
SOT-231 NPN 1uA 300mV 300mW 400 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSYONGYUTAIBipolar (BJT)
PMEG2020EH
SOD-123F1 Independent 200uA@20V 20V 2A 525mV@2A 9A SOD-123F Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1u | Capacitors:CAP_0603 | C2, C3, C4, C6, C8, C10, C12, C15, C17, C19, C22, C26, C32, C33, C34, C36 +1 |
| 5 | 10u | Capacitors:CAP_0603 | C1, C5, C13, C30, C31 |
| 4 | 100R | Resistors:RES_0603 | R6, R7, R8, R9 |
| 4 | 10k | Resistors:RES_0603 | R1, R3, R4, R10 |
| 4 | HOLE_METALLED | PCB:Hole3d3_out5d5mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 3 | 1.2nH | Inductors:IND_0402 | L3, L4, L5 |
| 3 | 1u | Capacitors:CAP_0603 | C7, C11, C35 |
| 3 | 220pF | Capacitors:CAP_0603 | C18, C24, C27 |
| 2 | 100pF | Capacitors:CAP_0402 | C20, C21 |
| 2 | 18pF | Capacitors:CAP_0603 | C14, C16 |
| 2 | 1pF | Capacitors:CAP_0402 | C23, C25 |
| 2 | BLM15AG102 | Inductors:IND_0402 | L1, L6 |
| 2 | REFPOINT | PCB:REF_POINT_2MM | RP1, RP2 |
| 1 | 1.5pF | Capacitors:CAP_0402 | C29 |
| 1 | 1.8pF | Capacitors:CAP_0402 | C28 |
| 1 | 1k | Resistors:RES_0603 | R2 |
| 1 | 22uH | Inductors:IND_1210_LQH32C | L2 |
| 1 | 24C08 | SO_DIL_TSSOP:SO8_150MIL | DD2 |
| 1 | 27MHz | Quartz:03225C4 | XTAL1 |
| 1 | 56k | Resistors:RES_0603 | R5 |
| 1 | BAT | Installation:BATTERY_AA | B1 |
| 1 | BUZZER | Installation:BUZZER_HC0903 | BZ1 |
| 1 | CC2500 | QFN_DFN:QFN20 | DD3 |
| 1 | CONN_3 | Connectors:PLS-3 | XL3 |
| 1 | CONN_5 | Connectors:WB-05(MW-5M) | XL2 |
| 1 | CONN_6 | Connectors:PLS-6 | XL1 |
| 1 | ER-TFT024 | Connectors:ER-CON50HT-1 | U1 |
| 1 | Logo | Pictures:Ostranna_12d7_10d1 | Logo1 |
| 1 | MMBT2222 | SOT:SOT23-3 | Q1 |
| 1 | NCP1400 | SOT:SOT23-5 | DA1 |
| 1 | PMEG2020 | Diodes:SOD323 | D1 |
| 1 | STM32L476Rx | LQFP_TQFP:LQFP64 | DD1 |
| 1 | STMPE811 | QFN_DFN:QFN16_4x4_H | DD4 |
| 1 | SWITCH_H | BtnsSwitches:SW_SS9 | SW1 |
| 1 | TESTPOINT | PCB:TESTPOINT_1MM | TP1 |
Questions
How big is the AlienDetector PCB?
It measures 60 × 76 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AlienDetector use?
75 parts, built around the CC2500RGP, STMPE811Q, BLM15AG102SN1 and MMBT2222. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AlienDetector KiCad files?
From the Kreyl/AlienDetector repository on GitHub, at the commit this page was made from: the board is AlienDetector_hw/AlienDetector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AlienDetector design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.
Similar boards
- 2 layers89 × 50 mm
- 4 layers200 × 99 mm
BSMainPCB
Kreyl/BigSphere
To create effects use https://github.com/notiel/SphereUI Change arrays in EffectPulse.h and EffectStrobo.h to generated by effect creator
877 parts - 4 layers71 × 40 mm
- 2 layers130.5 × 50.7 mm
- 4 layers310.5 × 21.4 mm
- 2 layers75.7 × 37.5 mm
- 4 layers49.6 × 49 mm
