2 layers89 × 50 mm
2 layers30.2 × 53.5 mm
Avada
Kreyl/avadaGreen Flash of Justice
- Size
- 30.2 × 53.5 mm
- Copper layers
- 2
- Thickness
- 1.5 mm
- Parts
- 40
- Nets
- 31
- Pads
- 166
- Tracks, vias
- 772, 87
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jun 2017
- Updated
- 19 Apr 2024
Overview
Avada is an open-source printed circuit board by Kreyl, from the Kreyl/avada repository on GitHub. It is a 2-layer board of 30.2 × 53.5 mm with 40 parts on 31 nets, routed with 772 tracks and 87 vias.
It is built around the NSS20101J, IRLML6401 and NCP583SQ28, with the PMEG2020EH among its other parts. Its parts include 13 capacitors, 6 resistors, 5 diodes, 5 transistors and 3 switches. It belongs with the STM32 boards of this library.
Main components
4
NSS20101J
SC-89-3-55℃~+150℃ 1 NPN 100nA 15mV 1A 200 20V 255mW 350MHz 6V NPN SC-89-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)
IRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETs
NCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PMEG2020EH
SOD-123F1 Independent 200uA@20V 20V 2A 525mV@2A 9A SOD-123F Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1u | Capacitors:CAP_0603 | C7, C8, C9 |
| 3 | 10u | Capacitors:CAP_0603 | C2, C4, C6 |
| 3 | 1k | Resistors:RES_0603 | R1, R5, R6 |
| 3 | 1u | Capacitors:CAP_0603 | C3, C5, C11 |
| 3 | NSS20101 | SOT:SC89-3 | Q3, Q4, Q5 |
| 2 | 10k | Resistors:RES_0603 | R3, R4 |
| 2 | 10n | Capacitors:CAP_0603 | C1, C10 |
| 2 | 220u | Capacitors:CAP_05xxR_horiz_HOLE | C12, C13 |
| 2 | IRLML6401 | SOT:SOT23-3 | Q1, Q2 |
| 1 | 3k | Resistors:RES_0603 | R2 |
| 1 | CONN_6 | Connectors:PLS-6 | XL1 |
| 1 | DIPx6 | BtnsSwitches:DIP_SMD_1D27X6 | SW2 |
| 1 | Fuse0R | Resistors:RES_0603_FUSE | F1 |
| 1 | IT1198 | BtnsSwitches:BTN_IT1198 | SW1 |
| 1 | LED | LEDs:LED_XPE | D5 |
| 1 | LED | LEDs:LED_Diamond_Dragon | D3 |
| 1 | LED | LEDs:LED_RAD | D4 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | LP603030 | Installation:EEMB603030 | B1 |
| 1 | MCP73832 | SOT:SOT23-5 | DA1 |
| 1 | NCP583SQ | SOT:SC82AB | DA2 |
| 1 | PMEG2020 | Diodes:SOD323 | D2 |
| 1 | PS-9627 | Installation:BUZZER_HC0903 | BZ1 |
| 1 | SS-1P2T | BtnsSwitches:SW_SS-1P2T_R | SW3 |
| 1 | STM32L151CxTx | LQFP_TQFP:LQFP48 | DD1 |
| 1 | USB_Micro_B | Connectors:USBmicro_MOLEX_WM17142 | XL2 |
Questions
How big is the Avada PCB?
It measures 30.2 × 53.5 mm and has 2 copper layers, 1.5 mm thick.
What parts does the Avada use?
40 parts, built around the NSS20101J, IRLML6401, NCP583SQ28 and PMEG2020EH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Avada KiCad files?
From the Kreyl/avada repository on GitHub, at the commit this page was made from: the board is Avada_hw/avada.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Avada design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.
Similar boards
- 2 layers75.7 × 37.5 mm
- 4 layers71 × 40 mm
- 2 layers46 × 103 mm
- 2 layers30 × 103 mm
- 2 layers54 × 63 mm
- 2 layers130.5 × 50.7 mm
- 4 layers310.5 × 21.4 mm
