
Rozhrani semestralka
misisnik/ExternalInterface
Bacheor these - An external user interface with USB

1U Eurorack ADSR
1U ADSR is an open-source printed circuit board by kraakenstuff, from the kraakenstuff/1U-ADSR repository on GitHub. It is a 2-layer board of 58.4 × 28.6 mm with 32 parts on 27 nets, routed with 168 tracks and 19 vias.
It is built around the LM358, NE555 and BC847. Its parts include 10 resistors, 5 capacitors, 5 diodes, 3 transistors and 2 ICs.
1U Eurorack ADSR module based on René Schmitz' schematic (https://www.schmitzbits.de/adsr.html)
Status: kinda works. I think that pcb will not be changed any more, but values need to be changed
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1n4148 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 1M | KraakenStuff:POT-9MM-ALPHA | RV1, RV2, RV3, RV4 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R4, R6, R9 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8, R10 |
| 3 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | Gate | KraakenStuff:PJ301M-12 | J1 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NE555 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Out | KraakenStuff:PJ301M-12 | J2 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | GND +12V -12V |

misisnik/ExternalInterface
Bacheor these - An external user interface with USB

kraakenstuff/ADSR
2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)





simonyiszk/ARDF-80m-rx
Rókavevő a 80m-es rádióamatőr sávra (3579 kHz fix frekvenciájú)

It measures 58.4 × 28.6 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the LM358, NE555 and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kraakenstuff/1U-ADSR repository on GitHub, at the commit this page was made from: the board is 1U ADSR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kraakenstuff before reusing the design.