
ARDF-80m rx
simonyiszk/ARDF-80m-rx
Rókavevő a 80m-es rádióamatőr sávra (3579 kHz fix frekvenciájú)

Rókavevő a 80m-es rádióamatőr sávra (3579 kHz fix frekvenciájú)
ARDF-80m RX with transistors is an open-source printed circuit board by simonyiszk, from the simonyiszk/ARDF-80m-rx repository on GitHub. It is a 2-layer board of 44.5 × 26 mm with 45 parts on 29 nets, routed with 166 tracks and 2 vias.
It is built around the LM358 and BC847. Its parts include 15 resistors, 13 capacitors, 6 diodes, 5 transistors and 1 IC.
Rókavevő a 80m-es rádióamatőr sávra (3579 kHz fix frekvenciájú)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R7, R8, R9, R10, R11, R12 |
| 7 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R5, R6, R13, R14, R15 |
| 5 | 180p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C8, C10, C12 |
| 5 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C11, C13 |
| 4 | 1N4148 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D5 |
| 4 | 22n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C9 |
| 1 | 100k | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1 |
| 1 | 210 cm 9 menet | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | ANT1 |
| 1 | 3.5795MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | BT1 |
| 1 | D_Schottky | Diode_SMD:D_SMB_Handsoldering | D4 |
| 1 | JACK | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D6 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |

simonyiszk/ARDF-80m-rx
Rókavevő a 80m-es rádióamatőr sávra (3579 kHz fix frekvenciájú)

simonyiszk/ARDF-80m-rx
Rókavevő a 80m-es rádióamatőr sávra (3579 kHz fix frekvenciájú)




ArthorH/PD-UniCharger
Universal power delivery charger with battery reverse polarity protection

backtail/ctrl-alt
6 HP Eurorack module and corresponding embedded framework


hasanberkdasar/smart-battery-charger
KiCad PCB and schematic for a PWM-controlled buck battery charging stage with voltage and current sensing.

It measures 44.5 × 26 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the LM358 and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the simonyiszk/ARDF-80m-rx repository on GitHub, at the commit this page was made from: the board is ARDF-80m-RX-with-transistors/ARDF-80m-RX-with-transistors.kicad_pcb and its schematic ARDF-80m-RX-with-SA612/ARDF-80m-rx.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask simonyiszk before reusing the design.