2 layers152 × 46.9 mm
Rozhrani semestralka
misisnik/ExternalInterface
Bacheor these - An external user interface with USB
64 parts1MIT
2 layers152 × 38.6 mm
Rozhrani semestralka
misisnik/ExternalInterface1Bacheor these - An external user interface with USB
- Size
- 152 × 38.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 72
- Pads
- 269
- Tracks, vias
- 1,003, 179
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Apr 2016
- Updated
- 20 Nov 2022
Overview
Rozhrani semestralka is an open-source printed circuit board by misisnik, from the misisnik/ExternalInterface repository on GitHub, published under the MIT licence. It is a 2-layer board of 152 × 38.6 mm with 73 parts on 72 nets, routed with 1,003 tracks and 179 vias.
It is built around the MCP2210-I/MQ, CD4532S and NE555, with the NPIC6C596D and BC847 among its other parts. Its parts include 25 capacitors, 23 resistors, 9 ICs, 3 connectors and 1 diode.
Main components
5
MCP2210-I/MQ
QFN-20-EP(5x5)-40℃~+85℃ 12Mbps 3.3V~5.5V 8 SPI USB to SPI QFN-20-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB ICs
CD4532S
SOP-160℃~+70℃ 1uA 2mA 3.5mA CMOS Decoder SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, Decoders
NE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / Counters
NPIC6C596D
SOP-16-40℃~+125℃ 1 4.5V~5.5V 8 Open-drain Serial-to-Serial or Parallel SOP-16 Shift Registers ROHSNexperiaShift Registers
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdExternal user irnterface with usb
Project tags:
- MCP2210
- Displat with "IST3020"
- Joystick
- Python library
Project tree:
- hw
- board with buttons on the left side - KiCad files - schematics and pcb
- board with buttons next to joystick - KiCad files - schematics and pcb
- casing - FreeCad projects for casing this user interface (3D pronting)
- sw
- Python 3.4 project lib
It contains:
Installation
-Ubuntu and python 2.7
---------------
$ apt-get update
$ apt-get install python-dev
$ apt-get install cython
$ apt-get install libusb-1.0.0 libusb-1.0.0-dev libudev-dev
$ pip install hidapi
install Pillow
$ apt-get install libjpeg-dev
$ pip3 install pillow
-- display LIB
git clone https://github.com/misisnik/ExternalInterface
-Raspbian Jesee
---------------
$ apt-get update
$ sudo apt-get install git python3.4 python3-dev
install pip3 from git
$ git clone https://github.com/pypa/pipExamples
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C4, C5, C6, C7, C8, C11, C12, C13 |
| 6 | 10K | Resistors_SMD:R_0603_HandSoldering | R9, R10, R11, R12, R13, R14 |
| 5 | NP | Capacitors_SMD:C_0603_HandSoldering | C20, C22, C23, C24, C25 |
| 4 | 2,2uF | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C9 |
| 3 | 390R | Resistors_SMD:R_0603_HandSoldering | R2, R3, R4 |
| 3 | Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | Fiducials:Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | FID1, FID2, FID3** |
| 2 | 33K | Resistors_SMD:R_0603_HandSoldering | R6, R7 |
| 1 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C10 |
| 1 | 0R | Resistors_SMD:R_0603_HandSoldering | R20 |
| 1 | 1,6n | Capacitors_SMD:C_0603_HandSoldering | C15 |
| 1 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C21 |
| 1 | 12MHz | pcb:resonator12MHz | Xtal |
| 1 | 12R | Resistors_SMD:R_0603_HandSoldering | R18 |
| 1 | 180pF | Capacitors_SMD:C_0603_HandSoldering | C18 |
| 1 | 1K | Resistors_SMD:R_0603_HandSoldering | R19 |
| 1 | 1M | Resistors_SMD:R_0603_HandSoldering | R23 |
| 1 | 22K | Resistors_SMD:R_0603_HandSoldering | R5 |
| 1 | 24R | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 3,2n | Capacitors_SMD:C_0603_HandSoldering | C14 |
| 1 | 390pF | Capacitors_SMD:C_0603_HandSoldering | C17 |
| 1 | 39R | Resistors_SMD:R_0603_HandSoldering | R22 |
| 1 | 3K | Resistors_SMD:R_0603_HandSoldering | R8 |
| 1 | 3k9 | Resistors_SMD:R_0603_HandSoldering | R15 |
| 1 | 4,7nF | Capacitors_SMD:C_0603_HandSoldering | C19 |
| 1 | 68R | Resistors_SMD:R_0603_HandSoldering | R21 |
| 1 | 68k | Resistors_SMD:R_0603_HandSoldering | R16 |
| 1 | 820p | Capacitors_SMD:C_0603_HandSoldering | C16 |
| 1 | BC847 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | CD4532 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U5 |
| 1 | DISPLAY_CONN | pcb:ZIF36 | P1 |
| 1 | DISPLAY_VCC_CON | pcb:disp_nap | P2 |
| 1 | Joystick | pcb:Joystick | U3 |
| 1 | LM239 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U4 |
| 1 | LOGO | pcb:LOGO | G*** |
| 1 | M1MA141KT1G | TO_SOT_Packages_SMD:SOT-323 | D1 |
| 1 | MCP2210 | Housings_SOIC:SOIC-20_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | MIC | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | NE555 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U7 |
| 1 | NP | Resistors_SMD:R_0603_HandSoldering | R17 |
| 1 | NPIC6C596 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U6 |
| 1 | PB6149L | pcb:PB6149L | U8 |
| 1 | PB6149Ldual | pcb:PB6149L | U9 |
| 1 | SPEAKER | pcb:Buzzer | SP1 |
| 1 | USB_B | Connect:USB_B | P3 |
The 68 most common of 73 parts.
More from misisnik/ExternalInterface
1Similar boards
- 2 layers44.2 × 26 mm
- 2 layers100 × 50 mm
- 2 layers40 × 16 mm
- 2 layers89.5 × 66 mm
- 2 layers120 × 99.5 mm
USB relay switch
calcite/ResetBuddy
Simple programmable HW interface for restarting evaluation boards and other electronic devices during automated testing.
93 partsMIT - 2 layers39 × 26 mm
- 2 layers40 × 30 mm
- 2 layers41.5 × 21 mm
Questions
How big is the Rozhrani semestralka PCB?
It measures 152 × 38.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rozhrani semestralka use?
73 parts, built around the MCP2210-I/MQ, CD4532S, NE555 and NPIC6C596D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rozhrani semestralka KiCad files?
From the misisnik/ExternalInterface repository on GitHub, at the commit this page was made from: the board is hw/board_buttons_on_the_other_side/rozhrani_semestralka.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rozhrani semestralka design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).