

ESP pwm-8ch V1
ESP8266/ESP32 based board with 8x PWM output channels.
- Size
- 113 × 67.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 69
- Pads
- 179
- Tracks, vias
- 444, 24
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Aug 2022
- Updated
- 19 Apr 2022
Overview
ESP pwm-8ch V1 is an open-source printed circuit board by koson, from the koson/ESP-pwm-8ch repository on GitHub. It is a 2-layer board of 113 × 67.8 mm with 48 parts on 69 nets, routed with 444 tracks and 24 vias.
It is built around the WEMOS D1 MINI, IR4427PBF and L78M05CV, with the IRLB8721PBF among its other parts. Its parts include 12 resistors, 11 capacitors, 8 transistors, 7 ICs and 5 connectors. It belongs with the ESP32, ESP8266 and RISC-V boards of this library.
Main components
4WEMOS D1 MINI
A mini wifi board with 4MB flash based on ESP-8266EX, hardware version 4.0.0.LolinUncategorisedIR4427PBF
PDIP-8-40℃~+150℃ 1.5A 1.5A 100uA 10ns 15ns 2 6V~20V IGBT、MOSFET Low Side PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate DriversL78M05CV
TO-2200℃~+150℃@(Tj) 1 2V 35V 40uV 500mA 5V 62dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRLB8721PBF
TO-220AB-55℃~+175℃ 1 N-channel 1.077nF 110pF 13nC@4.5V 16mΩ@4.5V 2.35V 30V 360pF 62A 65W N-Channel ±20V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdESP-pwm-8ch
ESP8266/ESP32 based board with 8x PWM output channels.
This board is designed to be driven by an Olimex ESP32-POE, ESP32-POE-ISO or Wemos D1 Mini modules running Tasmota.
When using the Olimex modules, you will need at least Tasmota V11.0.0 to have access to more than 5 PWM channels. And if you want to use the ethernet interface you will need to compile your own binaries enabling the corresponding features.
When using the Wemos D1 Mini the maximum number of outputs is 4, and expect some flickering and frequency oscillation due to the software implementation of the PWMs.
The design considers that the board will be mounted on a PCB DIN rail holder. The dimensions consider the holders offered by the Brazilian manufacturer Metaltex, check here for details.

Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 22R/0,125W/0805 | Tales:R_0805_2012Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
| 8 | IRLB8721PBF | Tales:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 5 | 0,1uF/50V/0805 | Tales:C_0805_2012Metric | C3, C4, C7, C9, C11 |
| 4 | 1uF 35V | Tales:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C5, C6, C8, C10 |
| 4 | IR4427 | Tales:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U6, U7 |
| 3 | GREEN/0603 | Tales:LED_0603_1608Metric | D2, D3, D4 |
| 1 | 0,33uF/35V | Tales:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C2 |
| 1 | 12VDC | Tales:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | 270R/0,125W/0805 | Tales:R_0805_2012Metric | R3 |
| 1 | 2k2/0,125W/0805 | Tales:R_0805_2012Metric | R1 |
| 1 | 47uF/35V/6,3x5,4 | Tales:CP_Elec_6.3x5.4 | C1 |
| 1 | 4k7/0,125W/0805 | Tales:R_0805_2012Metric | R12 |
| 1 | 680R/0,125W/0805 | Tales:R_0805_2012Metric | R2 |
| 1 | CH1/2 | Tales:TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal | J2 |
| 1 | CH3/4 | Tales:TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal | J3 |
| 1 | CH5/6 | Tales:TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal | J4 |
| 1 | CH7/8 | Tales:TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal | J5 |
| 1 | L78M05 | Tales:TO-252-2 | U1 |
| 1 | Olimex_ESP32-POE | Tales:Olimex_ESP32-POE_Pads | U3 |
| 1 | SM4007PL/SOD-123 | Tales:D_SOD-123 | D1 |
| 1 | WeMos_D1_mini | Tales:WEMOS_D1_mini_light_pads | U2 |
The 47 most common of 48 parts.
Similar boards
- 2 layers103 × 67.8 mm

- 2 layers129 × 66 mm

DC22-PCB1
Le-Dome-RDS/hope-bike
An open source Pedalling Assistant Sytem for 26" wheeled bikes
92 parts8 - 2 layers

- 2 layers81.7 × 45.8 mm

- 2 layers26 × 34.5 mm

Wemos mini external power
dzervas/wemos-mini-external-power
WeMos Mini shield for external power supply (up to 35V)
17 parts - 2 layers83.3 × 26 mm

Moodie analogue controller
mcdonnelldean/moodie
Create LED installations and mood lighting with ease
10 partsMIT - 2 layers160 × 100 mm

- 2 layers53.5 × 67.5 mm

Questions
How big is the ESP pwm-8ch V1 PCB?
It measures 113 × 67.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP pwm-8ch V1 use?
48 parts, built around the WEMOS D1 MINI, IR4427PBF, L78M05CV and IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP pwm-8ch V1 KiCad files?
From the koson/ESP-pwm-8ch repository on GitHub, at the commit this page was made from: the board is V1/ESP-pwm-8ch-V1.kicad_pcb and its schematic V1/ESP-pwm-8ch-V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP pwm-8ch V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.