4 layers117 × 69.4 mm
KINO D4 Carrier A0 2
b5463/kino-d4
Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.
256 parts4
2 layers100 × 93.9 mm
OpenFanHub
koskev/OpenFanHubThis project aims to provide plug and play solution for controlling fans and reading temperatures
- Size
- 100 × 93.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 97
- Pads
- 424
- Tracks, vias
- 765, 210
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Feb 2024
- Updated
- 22 Feb 2024
Overview
OpenFanHub is an open-source printed circuit board by koskev, from the koskev/OpenFanHub repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 93.9 mm with 120 parts on 97 nets, routed with 765 tracks and 210 vias.
It is built around the AMS1117, USBLC6-2SC6 and AO4409, with the IRLML2502 among its other parts. Its parts include 33 resistors, 25 capacitors, 12 transistors, 7 ICs and 6 connectors. It belongs with the STM32 boards of this library.
Main components
4
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
AO4409
SOP-8-55℃~+150℃ 1 P-Channel 1.9V 100nC@10V 15A 30V 3W 5.27nF 6.2mΩ@10V、9.5mΩ@4.5V 745pF 945pF P-Channel SOP-8 MOSFETs ROHSUMWMOSFETs
IRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdOpenFanHub
This project aims to provide plug and play solution for controlling fans and reading temperatures
Attention
- The USB-Library is licensed under the SLA0044 License and therefore incompatible with the GPL. Until this is resolved the GPL does not apply to the "Firmware" folder.
TODO
- Finish PCB
- Currently working on a barebone blue pill
- Probably remove the option for two different µC options
- Replace USB Lib
- Implement Rust version as a learning experience?
- But currently USB hates me :/
- Replace the USB lib to be compatible with an open source license
Features
- Connection for 18 fans
- 3 Fans form one group
- 6 independently controllable
- only one fan in each group reports rpm
- 3 pin fans are supported but not regulated (I tried it, but ended but beeing to complicated since I plan on using 4 pin anyways)
- 4 thermistor inputs
- compatible with the corsair commander pro driver of the kernel
- Compatible with the "blue pill" boards or an stm32f103c8tx in an LQFP48 package
- The goal is to make is easy to solder and LQFP48 can be hard
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | R | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +15 |
| 18 | Fan_4pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | M1, M2, M3, M4, M5, M6, M7, M10, M11, M12, M13, M14, M15, M16, M17, M18 +2 |
| 8 | C | Capacitor_SMD:C_0603_1608Metric | C10, C13, C14, C15, C16, C17, C18, C19 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C9 |
| 6 | 3Pin Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4, JP5, JP6, JP7, JP8, JP9 |
| 6 | AO4409 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q2, Q4, Q6, Q8, Q10, Q12 |
| 6 | C_Polarized | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C20, C21, C22, C23, C24, C25 |
| 6 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q5, Q7, Q9, Q11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | Thermistor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | TH1, TH2, TH3, TH4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric | C8, C12 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | AMS1117 | Package_TO_SOT_SMD:SOT-223 | U3, U5 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | JP1, JP2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 12V in | Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm | J3 |
| 1 | 3.3V connect | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | 5V IN | Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm | J5 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | FerriteBead | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | GND in | Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm | J4 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | STM32F103C8T8_Board | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_HEADER_IN | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | U6 |
| 1 | USB_HEADER_OUT | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | U7 |
Questions
How big is the OpenFanHub PCB?
It measures 100 × 93.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OpenFanHub use?
120 parts, built around the AMS1117, USBLC6-2SC6, AO4409 and IRLML2502. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenFanHub KiCad files?
From the koskev/OpenFanHub repository on GitHub, at the commit this page was made from: the board is Hardware/openfanhub/openfanhub.kicad_pcb and its schematic Hardware/openfanhub/fan_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenFanHub design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers96 × 97 mm
- 2 layers38 × 100 mm
Nylok Heater
boydportfolio/Nylok-Heater
Two-mode handheld induction-heater controller with KiCad design files, product design rendering, engineering calculations, and full cost analysis.
68 parts - 2 layers50 × 30 mm
- 4 layers60 × 28 mm
- 2 layers75.5 × 52.5 mm
- 4 layers110 × 120 mm
DUT Interface board v0.2
krishchan007/DUT_Interface_board_v0.2
v0.2 of DUT interface board with significant changes in layout, architecture etc.
271 parts1 - 2 layers54 × 85 mm
THIS IS GOOD COPY
CaptainCookie14/wallet-mp3-player
This project is a compact, portable MP3 player designed to fit roughly the size of a credit card. It focuses on minimal power usage, small PCB design, and simple user controls for playing music from onboard or external…
72 parts