Ubmp v1

Micro Black Magic Probe (µBMP)

A small Black Magic Probe based on the pinout of the STLink V2 support firmware. Connections has been added for the support of SWO, while the UART pinout is also available. Designed to stick directly into a USB port, without cable.

Changes

v1.4.1

• Reinforced the USB-C plug's mounting pads

v1.4

• Changed to USB-C plug

v1.3

• Added LED on the 5V line to see when the fuse is "blown"
• Removed panelized boards, to be updated later

v1.2

• Removed component designators to clean up the PCB, the designators are available in the Gerbers
• Consolidated components, using resistor arrays and 8ch ESD/EMI filter
• Now have ESD/EMI protection on the outputs
• Added fuse of 5V line

v1.0

• First release
• Tested and working

Resources

Schematics

A PDF print of the schematic are available in ubmp_v1_3.pdf.

Programming instructions

Clone and build stlink unless you already have it:

cd ~/git
git clone --recursive https://github.com/texane/stlink
cd stlink
make -j4

Clone and build the firmware for Black Magic Probe, note to use stlink as PROBE_HOST:

cd ~/git
git clone --recursive https://github.com/blacksphere/blackmagic.git
cd blackmagic
cd libopencm3
make -j4 lib
cd ../src
make -j4 PROBE_HOST=stlink

Flash the uBMP:

cp ../../stlink/build/Release/st-flash .
./st-flash erase
./st-flash write blackmagic_dfu.bin 0x8000000
./st-flash --reset write blackmagic.bin 0x8002000

Images

USB-C version (v1.4)

Second batch (v1.2)

First batch (v1.0)