korken89/kfly_hatKfly hat is an open-source printed circuit board by korken89, from the korken89/kfly_hat repository on GitHub. It is a 4-layer board of 34.5 × 56 mm with 90 parts on 97 nets, routed with 20 tracks and 20 vias.
It is built around the BMP388, W25X40CLUXIG and MIC5318-3.3YMT-TR, with the BMI160, TJA1051TK/3/1 and 0ZCK0075FF2E among its other parts. Its parts include 34 resistors, 23 capacitors, 14 connectors, 9 ICs and 4 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 330 | passive:R_0402_1005Metric_Rounded | R1, R3, R4, R11, R12, R13, R14, R15, R16, R17, R18, R19, R22, R23, R29, R31 +5 |
| 16 | 0.1uF | passive:C_0402_1005Metric_Rounded | C1, C2, C3, C4, C5, C8, C9, C10, C14, C15, C16, C17, C18, C20, C22, C23 |
| 8 | KFly_RC_Out | connectors:SM03B-GHS-TB | J1, J2, J3, J4, J5, J6, J7, J8 |
| 7 | 10k | passive:R_0402_1005Metric_Rounded | R2, R20, R25, R27, R30, R33, R34 |
| 7 | 4.7uF | passive:C_0603_1608Metric_Rounded | C6, C7, C11, C12, C13, C19, C21 |
| 5 | 1k | passive:R_0402_1005Metric_Rounded | R10, R21, R24, R28, R32 |
| 3 | LED | passive:D_0603_1608Metric_Rounded | D2, D3, D4 |
| 2 | BC807-25W,115 | sot:SOT-323_SC-70 | Q1, Q2 |
| 2 | MIC5318-3.3YMT | dfn:DFN-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm | U6, U7 |
| 2 | Mounting_Hole | MountingHole:MountingHole_2.7mm_Pad_Via | MK1, MK2 |
| 2 | NUF8401MNT4G | dfn:DFN-16-1EP_1.6x4mm_P0.5mm | U2, U8 |
| 1 | 0ZCK0075FF2E | passive:R_0805 | F1 |
| 1 | 120 | passive:R_0402_1005Metric_Rounded | R26 |
| 1 | BMI160 | lga:LGA-14-2.5x3 | U4 |
| 1 | BMP388 | lga:HLGA-10L-2.0x2.0-BMP388 | U3 |
| 1 | Dronecode_CAN | connectors:SM04B-GHS-TB | J13 |
| 1 | Dronecode_GPS | connectors:SM06B-GHS-TB | J12 |
| 1 | KFly_RC_In | connectors:SM03B-GHS-TB | J10 |
| 1 | Pixhawk_Switch | connectors:SM05B-GHS-TB | J14 |
| 1 | RPi_UART_10pin | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J9 |
| 1 | SDM40E20LA-7 | sot:SOT-23 | D1 |
| 1 | SIT8008BI-72-33E-25.000000G | crystals:Crystal_4Pin_2.0x1.6mm | X1 |
| 1 | STM32F722RETx | qfp:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | TJA1051TK-3 | dfn:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U9 |
| 1 | W25X40CLUXIG | son:USON-8-3x2mm-EP | U5 |
| 1 | swd-4 | connectors:jst-sh-hor-4 | J11 |
korken89/trustflight_hardware
A small and simple flight controller to be used with the trustflight firmware flight controller firmware, which is focusing on safety by using the Rust programming language.
klownfish/wren-altimeter
A tiny altimeter for 18mm rockets. Assembled by JLCPCB and written in Rust
si-nalsal/pcb-mantis
A servo-based UAV flight controller built around the STM32H743IIK6 (Cortex-M7, UFBGA-201, 0.65 mm pitch). The board distributes power to a fixed-wing/multirotor airframe with 16 PWM servo outputs, redundant IMU and…
keycard-tech/keycard-shell
Modular, fully open hardware wallet
It measures 34.5 × 56 mm and has 4 copper layers, 1.6 mm thick.
90 parts, built around the BMP388, W25X40CLUXIG, MIC5318-3.3YMT-TR and BMI160. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the korken89/kfly_hat repository on GitHub, at the commit this page was made from: the board is kfly_hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask korken89 before reusing the design.