8 layers75 × 79 mm
2 layers38 × 41.1 mm
SSD1351
Korkd/SSD13511Workshopping a breakout board for a SSD1351 128x128 OLED to mount to the left half of a BastardKB Dilemma.
- Size
- 38 × 41.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 31
- Pads
- 95
- Tracks, vias
- 141, 11
- Pours
- 28
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Jul 2024
- Updated
- 18 Jul 2024
Overview
SSD1351 is an open-source printed circuit board by Korkd, from the Korkd/SSD1351 repository on GitHub. It is a 2-layer board of 38 × 41.1 mm with 21 parts on 31 nets, routed with 141 tracks and 11 vias.
It is built around the SFV30R-4STBE1HLF, 1235AS-H-100M=P3 and ERJ-PB6B5623V. Its parts include 9 capacitors, 4 resistors, 2 ICs, 2 diodes and 1 connector.
Main components
3SFV30R-4STBE1HLF
SMD,P=0.5mm,卧贴FFC, FPC (Flat Flexible) Connector AssembliesAmphenol1235AS-H-100M=P3
SMD,4.7x4.5mm1.3A 10uH 132mΩ ±20% SMD,4.7x4.5mm Power Inductors ROHSMurataPower Inductors
ERJ-PB6B5623V
0805-55℃~+155℃ 200mW 562kΩ Thick Film Resistor ±0.1% ±50ppm/℃ 0805 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface Mount
README
Readme.mdWorkshopping a breakout board for a SSD1351 128x128 OLED to mount to the left half of a BastardKB Dilemma.
Goals
- Add slit to remove need to rotate display 180 degrees
- Take advantage of top mounting holes
- Match pinout of Dilemma
Shoutout to Jon Thomasson and his work as it was a great resource.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C5 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C8 |
| 2 | 1N4148 | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 1 | 1235AS-H-100M=P3 | SSD1351:IND_1235AS-H-100M=P3 | L1 |
| 1 | 52.3K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 806K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | CRCW080550R0FKTA | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Conn_01x07 | SSD1351:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | ERJ-PB6B5623V | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | SFV30R-4STBE1HLF | SSD1351:CONNECTORS_FPC_SFV30R_4STBE1HLF | U1 |
| 1 | TLV61046ADBVT | Package_TO_SOT_SMD:SOT-23-6 | U2 |
The 19 most common of 21 parts.
Questions
How big is the SSD1351 PCB?
It measures 38 × 41.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SSD1351 use?
21 parts, built around the SFV30R-4STBE1HLF, 1235AS-H-100M=P3 and ERJ-PB6B5623V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SSD1351 KiCad files?
From the Korkd/SSD1351 repository on GitHub, at the commit this page was made from: the board is PCB/SSD1351.kicad_pcb and its schematic PCB/SSD1351.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SSD1351 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Korkd before reusing the design.
Similar boards
- 4 layers120 × 65.8 mm
- 4 layers195 × 85 mm
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT