

Version current
- Size
- 195 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 212
- Pads
- 591
- Tracks, vias
- 1,140, 229
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Jul 2023
- Updated
- 26 Aug 2023
Overview
Version current is an open-source printed circuit board by oomlout, from the oomlout/oomlout_oomp_project_src repository on GitHub. It is a 4-layer board of 195 × 85 mm with 127 parts on 212 nets, routed with 1,140 tracks and 229 vias.
It is built around the AP3019AKTR-G1, SGTL5000XNLA3 and SN74LVC14ARGYR, with the 24C32, TPD3S014DBV and TXB0104RUTR among its other parts. Its parts include 39 capacitors, 28 resistors, 8 ICs, 8 switches and 8 inductors.
Main components
12AP3019AKTR-G1
TSOT-23-6L-40℃~+85℃ 1 1.2MHz 2.5V~16V 20mA Analog、PWM Boost Built-in DC-DC Over Voltage Protection、LED open-circuit protection、Built-in soft-start TSOT-23-6L LED Drivers ROHSDiodes IncorporatedLED DriversSGTL5000XNLA3
QFN-20-EP(3x3)-40℃~+85℃ 1.1V~2V、1.62V~3.6V 8kHz~96kHz Encoder/decoder I2S、I2C、SPI QFN-20-EP(3x3) Audio Interface ICs ROHSNXP SemiconductorsAudio Interface ICsSN74LVC14ARGYR
QFN-14-EP(3.5x3.5)-40℃~+85℃ 1 1.65V~3.6V 1uA 24mA 24mA 5pF 6 6.2ns@3.3V,50pF 74LVC Series QFN-14-EP(3.5x3.5) Flip Flops ROHSTexas InstrumentsFlip Flops24C32
SOP-8SOP-8 EEPROM ROHSGAOGE MICROCHIPEEPROMTPD3S014DBV
SOT-23-6-40℃~+125℃ 20nA 4.5V~5.5V 500mA Not supported Not supported Soft-start、Under-voltage lockout、Overcurrent Protection、Short-Circuit Protection、Reverse current blocking、Output discharge function SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesTXB0104RUTR
UQFN-12(1.7x2)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional Tri-State UQFN-12(1.7x2) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersC0402C104K9PACTU
0402100nF 6.3V X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTRMCF0402FT1K00
0402-55℃~+155℃ 1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRC0603JR-074K7L
UncategorisedUnknown makerT491A105K010AT
1206-55℃~+125℃ 10V 10Ω@100kHz 1uF ±10% 1206 Tantalum Capacitors ROHSKEMETTantalum CapacitorsT494A106M006AT
1206-55℃~+125℃ 10uF 2Ω 6.3V ±20% 1206 Tantalum Capacitors ROHSKEMETTantalum CapacitorsFBMJ1608HM180NTR
0603-40℃~+125℃ 1 18Ω@100MHz 4mΩ 7.5A ±30% 0603 Ferrite Beads ROHSTaiyo YudenFerrite Beads
README
projects_folder/newAM/Adapter_JTAG20PinTo6Pin/version_current/working/readme.mdAdapter_JTAG20PinTo6Pin by newAM
This is a harvested standardized copy of a project from github.
The original project can be found at:
https://github.com/newAM/Adapter_JTAG20PinTo6Pin
Please consult that link for additional, details, files, and license information.
Note: It was auto harvested and if the original repo had more than one board file or anything out of the ordinary the files here are likely not representative.
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | C0402C104K9PACTU | kimchi_ulid:C0402 | C2, C13, C14, C16, C18, C21, C28, C29, C32, C33, C36, C37, C38, C39, C40, C41 +6 |
| 20 | RMCF0402FT1K00 | AVR-KiCAD-Lib-Resistors:R0402 | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +4 |
| 10 | M1.5HOLE | kimchi_ulid:M1.5HOLE | H9, H10, H11, H12, H13, H14, H15, H16, H18, H20 |
| 8 | MEM_SWITCH | kimchi_ulid:MEM_SWITCH | S1, S2, S3, S4, S5, S6, S7, S8 |
| 5 | LCFE121002 | kimchi_ulid:LCFE121002 | L4, L5, L6, L7, L8 |
| 5 | M2.5HOLE | kimchi_ulid:M2.5HOLE | H5, H6, H7, H8, H17 |
| 5 | RC0603JR-074K7L | kimchi_ulid:R0603 | R4, R5, R6, R7, R8 |
| 5 | T491A105K010AT | kimchi_ulid:C1206 | C10, C12, C25, C26, C27 |
| 5 | T494A106M006AT | kimchi_ulid:T494A106M006AT | C3, C4, C5, C6, C11 |
| 4 | FBMJ1608HM180NTR | kimchi_ulid:R0603 | FB1, FB2, FB3, FB4 |
| 4 | MountingHole_Pad | kimchi_ulid:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 2 | C0603C104M5RACAUTO | kimchi_ulid:C0603 | C30, C34 |
| 2 | DF40HC(3.5)-60DS | kimchi_ulid:DF40HC(3.5)-60DS | J2, J3 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | LOGO1, LOGO2 |
| 2 | SFV5R-1STE1HLF | kimchi_ulid:SFV5R-1STE1HLF | J6, J7 |
| 2 | SN74LVC14ARGYR | kimchi_ulid:SN74LVC14ARGYR | U9, U10 |
| 2 | T491D227M010AT | kimchi_ulid:T491D227M010AT | C19, C22 |
| 1 | 24C32 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm | U1 |
| 1 | 54-00177 | kimchi_ulid:54-00177 | J1 |
| 1 | 68715014522 | kimchi_ulid:68715014522 | J5 |
| 1 | AP3019AKTR-G1 | kimchi_ulid:SOT-23-6_Handsoldering | U4 |
| 1 | C0603C105K4PAC7411 | kimchi_ulid:C0603 | C1 |
| 1 | CC1206MKX5R5BB107 | kimchi_ulid:C1206 | C35 |
| 1 | CL10A106MP8NNNC | kimchi_ulid:C0603 | C31 |
| 1 | DX07S016JA1R1500 | kimchi_ulid:JAE_DX07S016JA1R1500 | T1 |
| 1 | ER-TFT035-6 | kimchi_ulid:ER-TFT035-6_LCD_DISPLAY | DS1 |
| 1 | GG_LOGO | kimchi_ulid:groupgets_logo | L1 |
| 1 | Kimchi_SBC | kimchi_ulid:kimchi-micro-3d-model | M1 |
| 1 | LSM6DSRTR | kimchi_ulid:LSM6DSRTR | U5 |
| 1 | MCP23018T-E_MJ | kimchi_ulid:MCP23018T-E | U8 |
| 1 | OSHPARK_LOGO | kimchi_ulid:oshpark_logo | L2 |
| 1 | RC0402JR-072K2L | AVR-KiCAD-Lib-Resistors:R0402 | R2 |
| 1 | RC0603FR-0747KL | AVR-KiCAD-Lib-Resistors:R0603 | R3 |
| 1 | RE0603FRE0710RL | kimchi_ulid:R0603 | R1 |
| 1 | SFV30R-4STBE1HLF | kimchi_ulid:SFV30R-4STBE1HLF | T2 |
| 1 | SGTL5000XNLA3 | kimchi_ulid:QFN40P300X300X60-21N | J4 |
| 1 | TPD3S014 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7 |
| 1 | TXB0104RUTR | kimchi_ulid:TXB0104RUTR | U6 |
| 1 | TYA4012220M-10 | kimchi_ulid:R0603 | L3 |
More from oomlout/oomlout_oomp_project_src
12- 2 layers96 × 90 mm

- 2 layers254.8 × 128.5 mm

- 2 layers100 × 60 mm

- 2 layers97.1 × 99.4 mm

- 8 layers84 × 59.6 mm

- 2 layers99 × 100 mm

- 2 layers50 × 50 mm

- 4 layers225.6 × 187.5 mm

- 2 layers344.7 × 117.1 mm

- 4 layers48 × 48 mm

- 6 layers108.1 × 136.5 mm

- 4 layers55.5 × 96.8 mm

Similar boards
- 4 layers120 × 65.8 mm

- 4 layers65 × 45.4 mm

Kimchi ulid
adamjvr/kimchi-HiFi-lid
A lid for the Kimchi SBC that provides: Stereo audio ouptut/input, mic in, and headphone output.
51 parts1 - 2 layers72.8 × 38 mm

- 2 layers38 × 41.1 mm

SSD1351
Korkd/SSD1351
Workshopping a breakout board for a SSD1351 128x128 OLED to mount to the left half of a BastardKB Dilemma.
21 parts1 - 8 layers75 × 79 mm

- 4 layers95 × 67 mm

- 4 layers140 × 100 mm

Recline actuator controller
Accessibilita/recline-controls
Hardware project for open source wheel chair recline control electronics
181 partsCERN-OHL-S-2.0 - 4 layers61 × 22.9 mm

Finch Feather
adamjvr/DarkLeaf
Adafruit Feather style board for the STM32WB5MMGH6TR 2G RF Module
33 partsCERN-OHL-S-2.0
Questions
How big is the Version current PCB?
It measures 195 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Version current use?
127 parts, built around the AP3019AKTR-G1, SGTL5000XNLA3, SN74LVC14ARGYR and 24C32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Version current KiCad files?
From the oomlout/oomlout_oomp_project_src repository on GitHub, at the commit this page was made from: the board is projects_flat/adamjvr_kimchi_bbq_lid/version_current/working/working.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Version current design in my own project?
Its repository states no licence, so its author keeps all rights: ask oomlout before reusing the design.