

- Size
- 233.4 × 160 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 341
- Pads
- 852
- Tracks, vias
- 320, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Apr 2025
- Updated
- 3 Dec 2025
Overview
Mpu is an open-source printed circuit board by kolod, from the kolod/ztr-georg repository on GitHub. It is a 2-layer board of 233.4 × 160 mm with 78 parts on 341 nets, routed with 320 tracks and 0 vias.
It is built around the 74LS245SC, 74LS240DC and 74LS373SC, with the 74LS175PC among its other parts. Its parts include 39 capacitors, 24 diodes, 2 crystals, 1 resistor and 1 IC.
Main components
474LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS240DC
--55℃~+125℃ 1 15mA 18ns@5V,45pF 24mA 29mA 4.75V~5.25V 74LS Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS373SC
--55℃~+125℃ 1 2.6mA 24mA 38ns@5V,150pF 4.75V~5.25V 74LS 8 Output enable Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS175PC
PDIP-160℃~+70℃ 1 10ns 18mA 25ns@5V,15pF 30MHz 4 4.75V~5.25V 5ns 74LS Series Asynchronous Complementary type D-Type Reset Rising Edge PDIP-16 Flip Flops ROHSTexas InstrumentsFlip Flops
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 100nF | Georg:C_5.08mm | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +22 |
| 8 | ~ | Georg:555-2x01 | V1, V2, V3, V4, V5, V6, V7, V8 |
| 5 | 74LS245 | Georg:DIP-20_W7.62mm-tight | D2, D3, D5, D6, D30 |
| 3 | 8287 | Georg:DIP-20_W7.62mm-tight | D28, D31, D34 |
| 3 | D2764(128) | Georg:DIP-28_W15.24mm-tight | D21, D24, D26 |
| 2 | 0903196X921 | Georg:0903196X921 | X1, X2 |
| 1 | 10k | Georg:R_10.16mm | R1 |
| 1 | 1N4448 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 33µF | Georg:C_5.08mm | C1 |
| 1 | 7400 | Georg:DIP-14_W7.62mm-tight | D22 |
| 1 | 7408 | Georg:DIP-14_W7.62mm-tight | D20 |
| 1 | 7414 | Georg:DIP-14_W7.62mm-tight | D13 |
| 1 | 7432 | Georg:DIP-14_W7.62mm-tight | D14 |
| 1 | 74LS138 | Georg:DIP-16_W7.62mm-tight | D17 |
| 1 | 74LS175 | Georg:DIP-16_W7.62mm-tight | U1 |
| 1 | 74LS240 | Georg:DIP-20_W7.62mm-tight | D33 |
| 1 | 74LS373 | Georg:DIP-20_W7.62mm-tight | D27 |
| 1 | 8085A | Georg:DIP-40_W15.24mm-tight | D25 |
| 1 | 8255A | Georg:DIP-40_W15.24mm-tight | D9 |
| 1 | 8256 | Georg:DIP-40_W15.24mm-tight | D8 |
| 1 | 8259 | Georg:DIP-28_W15.24mm-tight | D32 |
| 1 | D446 | Georg:DIP-24_W15.24mm-tight | D29 |
| 1 | HC-49 | Crystal:Crystal_HC49-U-3Pin_Vertical | G1 |
| 1 | IQXO-350C | Georg:Oscillator_DIP-14-tight | G2 |
| 1 | ~ | Georg:1840.6131 | S1 |
More from kolod/ztr-georg
1- 4 layers233.4 × 160 mm

Similar boards
- 4 layers253.6 × 137.7 mm

S100 Thunder186-1.0-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
118 parts1 - 2 layers221.5 × 149.5 mm

ZX1
misterblack1/zenith_zt1
Information gathered on the Zenith ZT-1 / ZT-10 / ZT-11 and ZTX/ZT-x-A variants
140 parts5 - 4 layers304.8 × 215.9 mm

64 256KB SYSTEM BOARD
kev-ju/PC-Retro-MTM
Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.
197 parts4 - 2 layers320 × 150 mm

- 6 layers244 × 244 mm

Retroslop
CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.
193 parts - 2 layers190.5 × 77.5 mm

NinthWave512K
XekriRedmane/ninth_wave_256k
Reverse engineered Ninth Wave memory expansion board for Apple IIe.
69 partsMIT - 2 layers235 × 160 mm

Processor.Z80
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
136 parts15 - 2 layers228.1 × 172.7 mm

Questions
How big is the Mpu PCB?
It measures 233.4 × 160 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mpu use?
78 parts, built around the 74LS245SC, 74LS240DC, 74LS373SC and 74LS175PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mpu KiCad files?
From the kolod/ztr-georg repository on GitHub, at the commit this page was made from: the board is old-georg/kicad/mpu/mpu.kicad_pcb and its schematic old-georg/kicad/mpu/bus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mpu design in my own project?
Its repository states no licence, so its author keeps all rights: ask kolod before reusing the design.