
ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

Reverse engineered Ninth Wave memory expansion board for Apple IIe.
NinthWave512K is an open-source printed circuit board by XekriRedmane, from the XekriRedmane/ninth_wave_256k repository on GitHub, published under the MIT licence. It is a 2-layer board of 190.5 × 77.5 mm with 69 parts on 119 nets, routed with 2,607 tracks and 118 vias.
It is built around the 74LS245SC, 74LS373SC and 74LS00SC, with the 74LS11DC, 74LS139PC and 74LS173SC among its other parts. Its parts include 29 capacitors, 26 ICs, 7 resistors, 3 connectors and 2 crystals.
Reverse engineered Ninth Wave memory expansion board for Apple IIe.
It's actually a 512k expansion.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +9 |
| 16 | HM50256P-15 | Package_DIP:DIP-16_W7.62mm_Socket | U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24, U25, U26 |
| 5 | 560R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R9 |
| 2 | 10u | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mm | C3, C29 |
| 2 | 200p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C27, C28 |
| 2 | Conn_01x02 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | X0, X3 |
| 1 | 1k00 | Resistor_THT:R_Array_SIP10 | RP1 |
| 1 | 270R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 2K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U7 |
| 1 | 74LS11 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 74LS139 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | 74LS173 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | 74LS175 | Package_DIP:DIP-16_W7.62mm | U8 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U9 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U4 |
| 1 | 74LS373 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | 74LS374 | Package_DIP:DIP-20_W7.62mm | U10 |
| 1 | 74LS51 | Package_DIP:DIP-14_W7.62mm | U6 |
| 1 | Aux | Connector_AppleII:AuxPeriph | J3 |
| 1 | Conn_01x02 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | XA1 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x24 | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical | J2 |

hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics


clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II


felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs

schlae/AmdekDVM
Reverse engineering Amdek DVM video card for the Apple II

ceteras/Cobra-XP
Derived from Cobra, an experimental board for testing all kind of mods.

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.
It measures 190.5 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the 74LS245SC, 74LS373SC, 74LS00SC and 74LS11DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the XekriRedmane/ninth_wave_256k repository on GitHub, at the commit this page was made from: the board is NinthWave512K.kicad_pcb and its schematic NinthWave512K.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).