
LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

Tweliteを使った遠隔非常停止
TweliteEmergencyStop is an open-source printed circuit board by koki0517, from the koki0517/TweliteEmergencyStop repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 83.7 × 59 mm with 56 parts on 72 nets, routed with 191 tracks and 143 vias.
Its parts include 10 resistors, 10 connectors, 8 ICs, 4 capacitors and 2 fuses.
Tweliteを使った遠隔非常停止
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R7, R8, R9, R10 |
| 6 | XA02 | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | J13, J14, O2, OUT1, OUT1, OUT2 |
| 4 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U3, U4, U5, U6 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 350mA | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J6 |
| 2 | Emergency | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | Em1, Em2 |
| 2 | GND | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | GND, GND |
| 2 | R3111N211A | R3111N211A:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U7, U8 |
| 2 | VCC | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | Vcc, Vcc |
| 2 | btyLED | LED_THT:LED_D5.0mm | Low Voltage, Low Voltage |
| 2 | mode | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | pwrLED | LED_THT:LED_D5.0mm | Power, Power |
| 2 | sw | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4 |
| 2 | usrLED | LED_THT:LED_D5.0mm | User, User |
| 1 | BatteryBox | battery_box:batterybox | J1 |
| 1 | Emergency1 | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | Em2 |
| 1 | Emergency2 | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | Em1 |
| 1 | Program | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | TWE-L-DP-W | Package_DIP:DIP-28_W15.24mm | U2 |
| 1 | TWE-L-WX | RF_Module:MonoWireless_TWE-L-WX | U1 |
The 52 most common of 56 parts.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
It measures 83.7 × 59 mm and has 2 copper layers, 1.6 mm thick.
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the koki0517/TweliteEmergencyStop repository on GitHub, at the commit this page was made from: the board is TweliteEmergencyStop.kicad_pcb and its schematic TweliteEmergencyStop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).