
Km discrete adc
KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

schematics, board files, firmware, slide decks, and the like
Km covid is an open-source printed circuit board by KnoxMakers, from the KnoxMakers/Electronics repository on GitHub. It is a 2-layer board of 93.6 × 85 mm with 18 parts on 11 nets, routed with 52 tracks and 1 via.
Its parts include 8 resistors, 8 diodes, 1 connector and 1 switch.
schematics, board files, firmware, slide decks, and the like
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 300 | Rays Footprints:R_Axial_Minimal_KM | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | Rays Footprints:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | SW_SPDT | Rays Footprints:KM-SPDT-Slide | SW1 |
| 1 | USB-Micro-B-Power-Only | Rays Footprints:USB Micro-B Power Only | J1 |

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like


KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like

KnoxMakers/Electronics
schematics, board files, firmware, slide decks, and the like


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.


Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
It measures 93.6 × 85 mm and has 2 copper layers, 1.6 mm thick.
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KnoxMakers/Electronics repository on GitHub, at the commit this page was made from: the board is solder-kits/km-004-covid-19/kicad/km-covid.kicad_pcb and its schematic solder-kits/km-001-logo-badge/kicad files/intro-to-solder-kit-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KnoxMakers before reusing the design.