2 layers68 × 45 mm
Panel proto tracking comparator board
PantsForBirds/adsbee
Open Source Embedded ADS-B Receiver
336 parts344GPL-3.0
2 layers339.7 × 126.2 mm
Keebs v2
kkarnav/pikeyboardRaspberry pico based custom keyboard
- Size
- 339.7 × 126.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 336
- Nets
- 197
- Pads
- 836
- Tracks, vias
- 1,438, 74
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Oct 2025
- Updated
- 7 Jan 2026
Overview
Keebs v2 is an open-source printed circuit board by kkarnav, from the kkarnav/pikeyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 339.7 × 126.2 mm with 336 parts on 197 nets, routed with 1,438 tracks and 74 vias.
Its parts include 163 diodes, 83 switches and 81 resistors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdpikeyboard
A 75% custom keyboard made using the Raspberry Pi Pico.
Layout of the keyboard
PCB Layout
3D render of PCB
Keyboard Case
Keyboard in vial
Render of case and PCB put together
Parts
336| Qty | Value | Footprint | References |
|---|---|---|---|
| 82 | Diode | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +66 |
| 81 | Placeholder_LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +65 |
| 81 | Resistor | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +65 |
| 70 | Keyswitch | ScottoKeebs_MX:MX_Plate_1.00u | S1, S2, S10, S11, S12, S13, S15, S16, S17, S18, S19, S20, S21, S22, S23, S24 +54 |
| 8 | Mounting_Hole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 3 | Keyswitch | ScottoKeebs_MX:MX_Plate_1.25u | S73, S74, S75 |
| 2 | Keyswitch | ScottoKeebs_MX:MX_Plate_1.75u | S45, S70 |
| 2 | Keyswitch | ScottoKeebs_MX:MX_Plate_2.25u | S57, S59 |
| 2 | Keyswitch | ScottoKeebs_MX:MX_Plate_1.50u | S30, S43 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_Plate_6.25u | S76 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_2.00u | S28 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles | SW1 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW2 |
Similar boards
- 2 layers393.5 × 153.7 mm
- 2 layers250 × 250 mm
RocSync testing
BAL-ORX/RocSync
Millisecond-Accurate Temporal Synchronization for Heterogeneous Camera Systems
336 parts3MPL-2.0 - 2 layers319 × 95.6 mm
- 2 layers90.5 × 100 mm
- 2 layers186 × 146 mm
- 2 layers190 × 320 mm
- 2 layers285 × 94.6 mm
Questions
How big is the Keebs v2 PCB?
It measures 339.7 × 126.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keebs v2 use?
336 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keebs v2 KiCad files?
From the kkarnav/pikeyboard repository on GitHub, at the commit this page was made from: the board is PCB/Keebs v2.kicad_pcb and its schematic PCB/Keebs v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keebs v2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).