Skip to the content
2 layers106.7 × 109.2 mmOMIDItone V2, the printed circuit board in 3D

This is a refactored and updated version of the code in the https://github.com/kiyoshigawa/oMIDItone github repo intended to simplify and make faster the existing code base while simultaneously switching to PlatformIO.

Size
106.7 × 109.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
91
Nets
113
Pads
407
Tracks, vias
1,751, 180
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Dec 2019
Updated
29 Aug 2020

Overview

OMIDItone V2 is an open-source printed circuit board by kiyoshigawa, from the kiyoshigawa/oMIDItone_Controller_V2 repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 106.7 × 109.2 mm with 91 parts on 113 nets, routed with 1,751 tracks and 180 vias.

It is built around the PCA9685PW and BSS138. Its parts include 30 resistors, 19 ICs, 8 connectors, 6 transistors and 6 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

2

README

README.md

This is a refactored and updated version of the code in the https://github.com/kiyoshigawa/oMIDItone github repo intended to simplify and make faster the existing code base while simultaneously switching to PlatformIO.

It is code written to run a 6-head MIDI controlled Otamatone synth, including lighting and mouth opening/closing servo animations. The project is running on a Teensy 3.2, using the arduino framework through PlatformIO, and is using the following libraries in addition to the libraries that I have written myself specifically for this project: https://github.com/adafruit/Adafruit_NeoPixel https://github.com/adafruit/Adafruit-PWM-Servo-Driver-Library (Modified to work with i2c_t3.h) https://github.com/nox771/i2c_t3 https://github.com/pedvide/ADC

The updated version is reworked to make handling MIDI it's own MIDIController class, as well as to simplify the oMIDItone object class to operate based only on desired frequencies instead of handling MIDI notes, pitch bends, etc.

This readme information will be lagging behind the actual development of the code base until it is nearly done and working properly, so look for more up-to-date comments in the source files for the time being. Once the project is working properly and unlikely to ahve significant changes, I will add a better writeup of everything here.

All my code is being released under the GPLV3 unless otherwise noted in the included third party libraries that the project is built on.

Parts

91
QtyValueFootprintReferences
1210kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R14, R15, R16, R17, R18
12270RResistor_SMD:R_0603_1608MetricR8, R9, R10, R11, R12, R13, R19, R20, R21, R22, R23, R24
12MCP-4151Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU8, U9, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19
61kResistor_SMD:R_0603_1608MetricR25, R26, R27, R28, R29, R30
6BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6
6DUAL-OPTOPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2, U3, U4, U5, U6, U7
6SpeakerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalS1, S2, S3, S4, S5, S6
6otamatoneConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalOM1, OM2, OM3, OM4, OM5, OM6
41000UFCapacitors:CPOL-RADIAL-5MM-10MM-KITC1, C2, C3, C4
4MountingHole_PadMountingHole:MountingHole_3mm_Pad_ViaH1, H2, H3, H4
4TestPointMeasurement_Points:Test_Point_Keystone_5019_MinatureTP1, TP2, TP3, TP4
13v3_I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
15v_I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1LED PowerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1LED_StripConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1MIDIConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Otamatone PowerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1PCA9685Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ6
1SPI_OutConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ8
1SRVO_OEJumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP3
1SRVO_SCLJumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP4
1SRVO_SDAJumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP1
1SRVO_VOLTJumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP2
1Teensy3.2teensy:Teensy30_31_32_LCU1

Similar boards

  • 2 layers56 × 79 mmSurgery Lamp Control PCB, the printed circuit board in 3D

    Surgery Lamp Control PCB

    aeventre/Autotracking_Surgical_Lamp

    This ROS 2 workspace contains all packages required for the Auto-Tracking Surgical Lamp system. The lamp uses 3D pose tracking of a handheld remote (via green ball detection) to plan and execute motions in real-time…

    45 parts2
  • 2 layers70 × 80 mmSpiderbot, the printed circuit board in 3D

    Spiderbot

    aeventre/Self_Balancing_Hexapod_Robot

    The goal for the initial configuration of this project was to design a Hexapod Robot capable of performing dynamic movements and maintaining self-balance.

    136 parts2Apache-2.0
  • 2 layers265.5 × 132.3 mmDashdash, the printed circuit board in 3D

    Dashdash

    Churrosoft/Dashdash

    tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre

    272 parts1MIT
  • 2 layers111 × 119 mmCarte Principale, the printed circuit board in 3D

    Carte Principale

    clubrobot/Cartes-elec

    Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0

    115 parts1MIT
  • 4 layers100 × 100 mmDMX servo controller hardware, the printed circuit board in 3D

    DMX servo controller hardware

    flavioamieiro/dmx_servo_controller

    This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.

    63 parts1
  • 2 layers40 × 90 mmWingBoard, the printed circuit board in 3D

    WingBoard

    benjohnemmett/Wingman

    Hardware layout and code for a basic fixed wing flight controller.

    85 partsMIT
  • 2 layersEsp, the printed circuit board in 3D

    Esp

    DaLumberjack/Communifarm-PCB

    homeassistant-pcb

    95 parts

Questions

How big is the OMIDItone V2 PCB?

It measures 106.7 × 109.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OMIDItone V2 use?

91 parts, built around the PCA9685PW and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OMIDItone V2 KiCad files?

From the kiyoshigawa/oMIDItone_Controller_V2 repository on GitHub, at the commit this page was made from: the board is Controller PCB/oMIDItone V2/oMIDItone V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the OMIDItone V2 design in my own project?

Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).