2 layers148 × 98 mm
2 layers106 × 22 mm
Light ctl
kiu/lightdeskCustom desk light and RGB strip controller
- Size
- 106 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 30
- Pads
- 101
- Tracks, vias
- 209, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Feb 2024
- Updated
- 17 Feb 2024
Overview
Light ctl is an open-source printed circuit board by kiu, from the kiu/lightdesk repository on GitHub. It is a 2-layer board of 106 × 22 mm with 19 parts on 30 nets, routed with 209 tracks and 5 vias.
It is built around the ATMEGA328PB-AU. Its parts include 4 capacitors, 3 resistors, 3 connectors and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdlightdesk
Custom desk light and RGB strip controller
Superseded by https://github.com/kiu/kha
Photos
Render
License
This project is licensed under the Creative Commons Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0) license.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M3 | Mounting_Holes:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3 |
| 3 | R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3 |
| 2 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1, J3 |
| 1 | 100uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C4 |
| 1 | ATmega328PB-AU | Housings_QFP:LQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JPWR1 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JDBG1 |
| 1 | Conn_01x20 | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J2 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | JISP1 |
| 1 | Conn_02x05_Odd_Even | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | JBUS1 |
Questions
How big is the Light ctl PCB?
It measures 106 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Light ctl use?
19 parts, built around the ATMEGA328PB-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Light ctl KiCad files?
From the kiu/lightdesk repository on GitHub, at the commit this page was made from: the board is kicad/light-ctl/light-ctl.kicad_pcb and its schematic kicad/light-box/light-box.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Light ctl design in my own project?
Its repository states no licence, so its author keeps all rights: ask kiu before reusing the design.
More from kiu/lightdesk
2- 2 layers106 × 22 mm
Similar boards
- 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT - 2 layers102 × 81.5 mm
C64pico
silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4
97 parts86 - 2 layers58.4 × 34.3 mm
SIO2SD
c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.
26 parts83 - 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers88.9 × 50.8 mm
BLDC BIZ CARD
ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!
82 parts38MIT - 2 layers52.1 × 37.4 mm
Consolizer
orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)
25 parts38GPL-3.0 - 2 layers67.3 × 54 mm
Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers91.4 × 92.5 mm
