2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0
2 layers
Stm32devboard-
kiopity81/stm32devboard-dev board for STM32F401RE
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 70
- Pads
- 175
- Tracks, vias
- 315, 18
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Sep 2026
- Updated
- 15 Sep 2026
Overview
Stm32devboard- is an open-source printed circuit board by kiopity81, from the kiopity81/stm32devboard- repository on GitHub. It is a 2-layer board with 27 parts on 70 nets, routed with 315 tracks and 18 vias.
It is built around the AP2112K-3.3. Its parts include 13 capacitors, 4 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
1README
README.mdSTM32F401 Development Board
Description
STM32F401RET6 development board created using kicad.
Characteristics
- Power supply via USB Type-C
- Voltage regulator AP2112K-3.3
- SWD connector
- User LED (PA5)
- User button (PA6)
- BOOT0 jumper
- Reset circuit
Status
- Schematic is completed
- ERC check passed with no errors..
- PCB design is in process, placement is almost done
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C10, C11, C12 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 5.1K | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 8 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | STM32F401RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_JAE_DX07S024WJ3R400 | J2 |
Similar boards
- 2 layers53.2 × 24.8 mm
- 2 layers36 × 20 mm
- 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 4 layers70 × 72 mm
- 4 layers60.8 × 61.3 mm
- 2 layers100 × 57 mm
- 4 layers74 × 104 mm
Questions
What parts does the Stm32devboard- use?
27 parts, built around the AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32devboard- KiCad files?
From the kiopity81/stm32devboard- repository on GitHub, at the commit this page was made from: the board is pcb/stm32_devboard.kicad_pcb and its schematic schematics/stm32_devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32devboard- design in my own project?
Its repository states no licence, so its author keeps all rights: ask kiopity81 before reusing the design.