
MPS Drive Amp 2
OS-MPI/MPS
The MPS system is a particle characterizing apparatus designed by the MIT/MGH group

Sync chan is an open-source printed circuit board by kinoshita-lab, from the kinoshita-lab/Sync-chan repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 97 mm with 53 parts on 80 nets, routed with 562 tracks and 115 vias.
It is built around the LM358MX and 74HC4050D. Its parts include 11 resistors, 7 diodes, 6 connectors, 5 capacitors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistors_SMD:R_0603_HandSoldering | R1, R6, R8, R9, R10, R11, R12, R13 |
| 7 | LED | Sync-chan:LED_0603_HandSoldering_easier | LED1, LED2, LED3, LED4, LED5, LED6, LED7 |
| 6 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6 |
| 5 | AudioJack3_Ring_Switch | Sync-chan:3.5mm_Stereo_Molex_0472570001 | J2, J3, J4, J5, J6 |
| 4 | TestPoint | Sync-chan:TP_1PAD | TP3, TP4, TP5, TP6 |
| 3 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C2, C6, C8 |
| 3 | 10k | Resistors_SMD:R_0603_HandSoldering | R2, R3, R7 |
| 3 | Tactile | Sync-chan:SW_Tactile_Akizuki | S1, S2, S3 |
| 2 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C1, C7 |
| 2 | TestPoint | Sync-chan:TP_PAD_LARGE | TP1, TP2 |
| 1 | 10k | Sync-chan:POT_TOCOS_GF063P1 | RV1 |
| 1 | 10k | Sync-chan:POT_Slide_SL4515N | RV2 |
| 1 | 10k | Sync-chan:Potentiometer_Alps_RK09K_Horizontal_CORRECTED | RV3 |
| 1 | 74HC4050 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U4 |
| 1 | 7seg_4digit_cathode_common_OSL40562-LR | Sync-chan:7seg_4digit_cathode_common_OSL40562-LR | 7SEG-1 |
| 1 | Arduino_Nano_v3.x | Modules:Arduino_Nano | U3 |
| 1 | Jack-DC | Sync-chan:MRUSB-2B-D14NI-S306 | J1 |
| 1 | LM358MX | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | SW_SPDT | Sync-chan:SW_SPDT_2.5mm | SW1 |
| 1 | TM1640_7seg_driver | Housings_SOIC:SOIC-28W_7.5x18.7mm_Pitch1.27mm | U2 |

OS-MPI/MPS
The MPS system is a particle characterizing apparatus designed by the MIT/MGH group


blackbit42/HP54542_LCD2VGA
Conversion of HP 54520C / 54540C oscilloscopes to VGA display(s)

46nori/Z80Atmega128
Real Z80A system with I/O emulated by AVR(ATmega128)


stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

UBC-Thunderbots/Electrical
All things electrical, from radio communication to BLDC motors. Zappity zap!

It measures 100 × 97 mm and has 4 copper layers, 1.6 mm thick.
53 parts, built around the LM358MX and 74HC4050D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kinoshita-lab/Sync-chan repository on GitHub, at the commit this page was made from: the board is hardware/Sync-chan.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).