

HP 54542C Display Adapter
Conversion of HP 54520C / 54540C oscilloscopes to VGA display(s)
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.66 mm
- Parts
- 58
- Nets
- 130
- Pads
- 316
- Tracks, vias
- 422, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jan 2023
- Updated
- 13 Jan 2023
Overview
HP 54542C Display Adapter is an open-source printed circuit board by blackbit42, from the blackbit42/HP54542_LCD2VGA repository on GitHub. It is a 4-layer board of 100 × 100 mm with 58 parts on 130 nets, routed with 422 tracks and 8 vias.
It is built around the 74HC4050D. Its parts include 36 resistors, 7 ICs, 6 capacitors and 5 connectors. It belongs with the lEDs and displays and sensors and measurement boards of this library.
Main components
1README
README.mdConversion of HP 54520C / 54540C oscilloscopes to VGA display(s)
The HP 54520C / 54540C series of oscilloscopes is equipped with color LCD displays, in contrast to their non-C predecessors which had monochrome CRT displays. While the multi-color display is nice in principle, the LCDs that were used unfortunately commonly failed. Those scopes are still quite capable by 2023 standards, hence worth preserving. The content of this repository is a conversion of the scope to VGA through a FPGA bitstream and a PCB design that is using an UPduino as a daughterboard.
Pretty much the same hack has been done before by Adil Malik, though now FPGA and PCB designs are made available for other people to reproduce.
Implementation details
The PCB is designed to have mounting holes placed in distance to be compatible with VESA MIS-D (75x75), which allows the PCB to be mounted sturdily at the backside of the used VGA TFT inside the scope.
Hirose DF13 connectors are stipulated on the PCB so that the original LCD cables don't have to be modified.
The PCB and UPduino are powered from the LCD connections. The VGA TFT is powered from the scope PSU.
The entire modification of the instrument is non-invasive and can be undone if desired.
Findings
HP decided to mount the LCD panel upside down. Probably as that was convenient is regards to the position of the connectors. An implication of that is that the internal VGGA monitor is mounted upside down as well (which doesn't make a difference really) and that an external monitor must be rotated as well. If one would desire to change that, a frame buffer must be implemented in the FPGA, which isn't hard to do but required more RAM than the UPduino has.
Errata
Rev.1 of the PCB design contains an error. The footprint for the UPduino is 0.2" too narrow. I fixed this with infamous offset-pinheaders of shame. Keep this in mind if you intend to get a PCB produced. Patches welcome :-)
PCBs
As of 10 Jan 2023 I have some spare PCBs in stock. Get in touch via the email address I've used for the commits if you want one.
Pictures





Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R17, R18, R20, R21, R23, R24, R26, R27, R30, R32, R33, R36 |
| 12 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C7 |
| 6 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R16, R19, R22, R25, R31 |
| 6 | 74HC4050 | Package_DIP:DIP-16_W7.62mm_LongPads | U2, U3, U4, U5, U6, U7 |
| 4 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28, R29, R34, R35 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H4 |
| 2 | DB15_Female_HighDensity | HP_54542C_Display_Adapter:VGA | J4, J5 |
| 1 | Conn_01x10 | Connector_PinSocket_1.27mm:PinSocket_1x10_P1.27mm_Vertical | J2 |
| 1 | Conn_01x15 | Connector_PinSocket_1.27mm:PinSocket_1x15_P1.27mm_Vertical | J1 |
| 1 | Conn_01x25 | Connector_PinHeader_2.54mm:PinHeader_1x25_P2.54mm_Vertical | J3 |
| 1 | UPduino_3.0 | Package_DIP:DIP-48_W15.24mm_LongPads | U1 |
Similar boards
- 4 layers39.4 × 110.3 mm

- 4 layers170 × 130 mm

Z80Atmega128
46nori/Z80Atmega128
Real Z80A system with I/O emulated by AVR(ATmega128)
109 parts9GPL-3.0 - 2 layers85 × 56 mm

- 2 layers198.1 × 193 mm

STE25
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
252 parts5BSD-2-Clause - 4 layers100 × 100 mm

Robot
UBC-Thunderbots/Electrical
All things electrical, from radio communication to BLDC motors. Zappity zap!
186 parts3 - 4 layers100 × 97 mm

- 4 layers352.3 × 159.3 mm

- 2 layers100 × 200 mm

Questions
How big is the HP 54542C Display Adapter PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.66 mm thick.
What parts does the HP 54542C Display Adapter use?
58 parts, built around the 74HC4050D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HP 54542C Display Adapter KiCad files?
From the blackbit42/HP54542_LCD2VGA repository on GitHub, at the commit this page was made from: the board is pcb/HP_54542C_Display_Adapter.kicad_pcb and its schematic pcb/HP_54542C_Display_Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HP 54542C Display Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask blackbit42 before reusing the design.