

For more detail on the project see links below:
- Size
- 99.1 × 99.1 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 60
- Nets
- 185
- Pads
- 664
- Tracks, vias
- 532, 60
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Feb 2023
- Updated
- 27 Feb 2023
Overview
Hub is an open-source printed circuit board by kingoflolz, from the kingoflolz/mic_hardware repository on GitHub. It is a 4-layer board of 99.1 × 99.1 mm with 60 parts on 185 nets, routed with 532 tracks and 60 vias.
It is built around the AMS1117-3.3 and RB1-125B8G1A. Its parts include 28 connectors, 5 capacitors, 2 resistors and 1 IC.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRB1-125B8G1A
插件0℃~+70℃ 1 Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSUDE CorpEthernet Connectors / Modular Connectors (RJ45 RJ11)
README
README.mdPhased Array Microphone Hardware and Mechanical Designs
For more detail on the project see links below:
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.00mm:PinHeader_2x04_P2.00mm_Vertical | J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24 +8 |
| 24 | MountingHole | Mounting_Wuerth:Mounting_Wuerth_WA-SMSI-M3_H8mm_9774080360 | H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23 +8 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMD | J29 |
| 1 | RB1-125B8G1A | Connector_RJ:RJ45_UDE_RB1-125B8G1A | J3 |
| 1 | SODIMM-200_Split | 1473005-4:14730054 | J1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105133-0001 | J28 |
More from kingoflolz/mic_hardware
2- 4 layers60 × 570 mm

- 4 layers10 × 570 mm

Similar boards
- 4 layers87.3 × 56.7 mm

CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT - 4 layers85 × 54 mm

- 4 layers80 × 55 mm

- 4 layers147.4 × 91 mm

- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

Questions
How big is the Hub PCB?
It measures 99.1 × 99.1 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Hub use?
60 parts, built around the AMS1117-3.3 and RB1-125B8G1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hub KiCad files?
From the kingoflolz/mic_hardware repository on GitHub, at the commit this page was made from: the board is hub/hub.kicad_pcb and its schematic arm/arm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hub design in my own project?
Its repository states no licence, so its author keeps all rights: ask kingoflolz before reusing the design.