Skip to the content
2 layers91 × 75 mmWeatherDisplay, the printed circuit board in 3D

Schematics and PCBs for the ESP32 Based Weather Station using ESP-NOW.

Size
91 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
99
Pads
232
Tracks, vias
500, 35
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Sep 2020
Updated
15 Apr 2021

Overview

WeatherDisplay is an open-source printed circuit board by kevinkessler, from the kevinkessler/WeatherStation-PCB repository on GitHub. It is a 2-layer board of 91 × 75 mm with 33 parts on 99 nets, routed with 500 tracks and 35 vias.

It is built around the ESP32-WROOM-32U and HTU21D. Its parts include 10 connectors, 7 capacitors, 7 resistors, 2 ICs and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

README.md

Schematics and PCBs for the ESP32 Based Weather Station using ESP-NOW.

More information can be found here

Parts

33
QtyValueFootprintReferences
510KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R6, R7
3100nCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C3, C5
310uCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2, C4, C7
24.7KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R5
1CP1Capacitor_THT:CP_Radial_D6.3mm_P2.50mmC6
1DEBUGConnector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_VerticalJ3
1DISPLAYConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ9
1DISPLAY_2Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ10
1DISPLAY_POWER_JUMPERConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1ESP32-WROOM-32URF_Module:ESP32-WROOM-32UU2
1ESP32_POWER_JUMPERConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1HTU21DConnector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_VerticalJ8
1MODULE_LEFTConnector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_VerticalJ6
1MODULE_RIGHTConnector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_VerticalJ7
1NCP1117-3.3_TO252Package_TO_SOT_SMD:TO-252-2U1
1POWERConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1PROG_HEADERConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1SW_ENButton_Switch_THT:SW_PUSH_6mmSW1
1SW_I0Button_Switch_THT:SW_PUSH_6mmSW2

The 28 most common of 33 parts.

More from kevinkessler/WeatherStation-PCB

3
  • 2 layers92.5 × 41 mmWeatherStation, the printed circuit board in 3D

    WeatherStation

    kevinkessler/WeatherStation-PCB

    Schematics and PCBs for the ESP32 Based Weather Station using ESP-NOW.

    43 parts3
  • 2 layers17 × 14.5 mmLightSensors, the printed circuit board in 3D

    LightSensors

    kevinkessler/WeatherStation-PCB

    Schematics and PCBs for the ESP32 Based Weather Station using ESP-NOW.

    14 parts3
  • 2 layers31 × 21 mmRJ11Adapter, the printed circuit board in 3D

    RJ11Adapter

    kevinkessler/WeatherStation-PCB

    Schematics and PCBs for the ESP32 Based Weather Station using ESP-NOW.

    4 parts3

Similar boards

  • 2 layers93 × 42 mmADEM, the printed circuit board in 3D

    ADEM

    timelab/ADEM

    Mobile device for distributed measurements of particulate matter (fine dust)

    29 parts13LGPL-3.0
  • 2 layers70 × 40 mmMoreE u blox E PEAS, the printed circuit board in 3D

    MoreE u blox E PEAS

    ldab/Node-RED-Energy-Harvesting-dashboard

    Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT

    43 parts11MIT
  • 2 layers29 × 57 mmTeapot, the printed circuit board in 3D

    Teapot

    cillian64/teapot

    ukhasnet node with temperature, light and humidity sensing

    51 parts1
  • 2 layers26.4 × 36.1 mmSensof ht, the printed circuit board in 3D

    Sensof ht

    dimhoff/sensof

    Si4010 based wireless sensors(temperature, humidity, etc.) firmware and utilities

    24 parts1
  • 4 layers55 × 63 mmPicoballoon, the printed circuit board in 3D

    Picoballoon

    vojt444/picoballoon

    97 parts1
  • 2 layers31 × 130 mmHandheld unit old3, the printed circuit board in 3D

    Handheld unit old3

    zegarac/Photosynq-hardware

    Photosynq KiCad files for the main board and other associated hardware

    127 parts1GPL-3.0
  • 2 layers50 × 35 mmPerpetualClock, the printed circuit board in 3D

    PerpetualClock

    CXJ007/LP_Clock

    Low-power clock

    93 parts

Questions

How big is the WeatherDisplay PCB?

It measures 91 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the WeatherDisplay use?

33 parts, built around the ESP32-WROOM-32U and HTU21D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the WeatherDisplay KiCad files?

From the kevinkessler/WeatherStation-PCB repository on GitHub, at the commit this page was made from: the board is WeatherDisplay/WeatherDisplay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the WeatherDisplay design in my own project?

Its repository states no licence, so its author keeps all rights: ask kevinkessler before reusing the design.