

Kerigokbd
KERIgoKBD (KERI's Ergonomic Keyboard)
- Size
- 139.5 × 92 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 85
- Pads
- 666
- Tracks, vias
- 2,651, 272
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Dec 2024
- Updated
- 16 Oct 2026
Overview
Kerigokbd is an open-source printed circuit board by kerikun11, from the kerikun11/kerigokbd repository on GitHub. It is a 2-layer board of 139.5 × 92 mm with 83 parts on 85 nets, routed with 2,651 tracks and 272 vias.
It is built around the RP2040, W25Q16JVUXIQ and TLV75533PDBVR-MS, with the TS-1088R-02026, SJ-3501-SMT-TR and USB4520-03-0-A among its other parts. Its parts include 24 diodes, 24 switches, 12 capacitors, 9 resistors and 4 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
6RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASHTLV75533PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedTS-1088R-02026
SMD,4x3mm100,000 cycles 12V 2.6N 2.93mm 2mm 3.9mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesSJ-3501-SMT-TR
插件,5.8x14.5mm-25℃~+85℃ 12V 1A 3.5mm Headphone Jack Copper alloy Gold 插件,5.8x14.5mm Audio Connectors ROHSCUIAudio Connectors (Headphones)USB4520-03-0-A
SMD-25℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdKERIgoKBD (KERI's Ergonomic Keyboard)
けりの自作キーボードの設計データ。

kerigokbd/
├── hardware/
│ ├── kerigokbd/ # KERIgoKBD common PCB/case parts
│ └── README.md # Hardware parts and compatibility table
├── software/
│ └── qmk/
│ ├── firmware/ # QMK Firmware for VIA (git submodule)
│ ├── keyboards/ # Keyboard entries for QMK Firmware
│ ├── qmk.sh # build script
│ └── README.md # build manual
├── .gitmodules
└── README.md作品一覧
ハードウェア部品とファームウェアの対応は hardware/README.md に記載。
| 作品 | コメント |
|---|---|
| KERIgoKBD v1 | はじめての自作エルゴノミックキーボード。 |
| KERIgoKBD v2 | KERIgoKBD v1 にトラックパッドを追加した構成。 |
| KERIgoKBD Corne v4 | Corne V4 Chocolate のケースとファームウェアをカスタマイズしたもの。 |
| Keyball44 RP2040 | Keyball44 のマイコンボードを RP2040 Pro Micro に差し替えたもの。 |
KERIgoKBD v1
けりのはじめての自作キーボード。

KERIgoKBD v2
KERIgoKBD v1 の右手側にトラックパッドを追加した構成。

KERIgoKBD Corne v4
foostanさんのCorne V4 Chocolateのケースとファームウェアをカスタマイズしたもの。

Keyball44 RP2040
YowkeesさんのKeyball44のマイコンボードを RP2040 Pro Micro に差し替えたもの。

Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Key_SW | kbd_local:keyswitch_choc12_hotswap_1u_dual | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +8 |
| 24 | YS-SK6812MINI-E | kbd_local:YS-SK6812MINI-E-dual | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +8 |
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C7, C8 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C12, C13, C15 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R7, R9 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C14, C16 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | NSR0520V2T5G | Diode_SMD:D_SOD-523 | ZD1, ZD2 |
| 2 | TS-1088R-02026 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | SMDSW1, SMDSW2 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 5.6k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | I2C | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2 |
| 1 | LED_EN | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | RP2040 | kbd_local:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | SJ-3501-SMT-TR | kbd_local:PJ-398A-5A_PJ-399B-6A-dual | J4 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J3 |
| 1 | Split Right | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | TLV75533PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USB4520-03-0-A | kbd_local:TYPE-C-31-M-13C-dual | J1 |
| 1 | W25Q16JVUXIQ | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
More from kerikun11/kerigokbd
2- 2 layers139.5 × 92 mm

- 2 layers134.8 × 87.7 mm

Similar boards
- 2 layers88.4 × 80 mm

LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers262 × 113.9 mm

Quacken
Nuclear-Squid/Quacken
Libre, ergonomic, polymorphic: a single PCB for many possible layouts.
108 parts38GPL-3.0 - 2 layers77 × 119 mm

- 2 layers82 × 144.9 mm

- 4 layers26 × 30 mm

- 4 layers42.3 × 47 mm

- 4 layers36.8 × 24.1 mm

- 2 layers5 × 11.2 mm

Questions
How big is the Kerigokbd PCB?
It measures 139.5 × 92 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kerigokbd use?
83 parts, built around the RP2040, W25Q16JVUXIQ, TLV75533PDBVR-MS and TS-1088R-02026. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kerigokbd KiCad files?
From the kerikun11/kerigokbd repository on GitHub, at the commit this page was made from: the board is hardware/kerigokbd/pcb_20250208/kerigokbd.kicad_pcb and its schematic hardware/kerigokbd/pcb_20241229/kerigokbd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kerigokbd design in my own project?
Its repository states no licence, so its author keeps all rights: ask kerikun11 before reusing the design.