

Handy40choco mcu pico
- Size
- 169 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 385
- Nets
- 429
- Pads
- 509
- Tracks, vias
- 140, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Feb 2025
- Updated
- 29 Dec 2025
Overview
Handy40choco mcu pico is an open-source printed circuit board by kenyahiro, from the kenyahiro/handy40choco repository on GitHub, published under the MIT licence. It is a 2-layer board of 169 × 40 mm with 385 parts on 429 nets, routed with 140 tracks and 12 vias.
It is built around the DMG2301L. Its parts include 8 resistors, 3 connectors, 1 IC and 1 transistor. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdhandy40choco
Parts
385| Qty | Value | Footprint | References |
|---|---|---|---|
| 372 | MountingHole_Pad | my_keyswitch:TestPoint_THTPad_a | H1, H10, H11, H100, H101, H102, H103, H104, H105, H106, H107, H108, H109, H110, H111, H112 +356 |
| 5 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x20 | my_keyswitch:my_PinHeader_1x20_P2.54mm_Vertical_p0.85 | J2 |
| 1 | Conn_02x08_Odd_Even | my_pico:oled_PinSocket_2x08_P2.54mm_Vertical | J3 |
| 1 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Pico | my_pico:pico_no_dbg_smd_th_p0.85 | U1 |
More from kenyahiro/handy40choco
2- 2 layers172 × 69.5 mm

- 2 layers169.5 × 40 mm

Similar boards
- 4 layers70 × 72 mm

- 4 layers70 × 54 mm

- 2 layers192.4 × 50 mm

- 4 layers55 × 97 mm

Melodio SelfMate V2
zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.
121 parts53 - 2 layers75.8 × 19.2 mm

3S coinCellChargeController
PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.
78 parts36 - 2 layers51.8 × 51.8 mm

Pawpet
NanoCodeBug/pawpet
A virtual pet using the atsamd21g and sharp memory lcd, runs off of 2xAAA for a couple of months. See PawPet on Hacakday.io for full gallery.
41 parts20 - 4 layers68.8 × 90.3 mm

Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!
173 parts17 - 2 layers69 × 72 mm

MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.
47 parts16Apache-2.0
Questions
How big is the Handy40choco mcu pico PCB?
It measures 169 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Handy40choco mcu pico use?
385 parts, built around the DMG2301L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Handy40choco mcu pico KiCad files?
From the kenyahiro/handy40choco repository on GitHub, at the commit this page was made from: the board is sch/handy40choco-mcu-pico/handy40choco-mcu-pico.kicad_pcb and its schematic sch/handy40choco-mcu-esp32/handy40choco-mcu-esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Handy40choco mcu pico design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).