Skip to the content
2 layers45 × 45 mmOBC644-10D, the printed circuit board in 3D

arduino compatible on-board computer

Size
45 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
82
Nets
76
Pads
282
Tracks, vias
1,060, 90
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
3 Sep 2016
Updated
17 Jul 2019

Overview

OBC644-10D is an open-source printed circuit board by kentN, from the kentN/OBC644-10D repository on GitHub, published under the MIT licence. It is a 2-layer board of 45 × 45 mm with 82 parts on 76 nets, routed with 1,060 tracks and 90 vias.

It is built around the INA226AQDGSRQ1, MS561101BA03-00 and LT1761ES5-3.3, with the MPU-9250, RX8900CE-NF and SML-D12M8WT86 among its other parts. Its parts include 24 capacitors, 12 ICs, 11 resistors, 4 connectors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

6

README

README.md

OBC644-10D

ATmega644/1284-based arduino compatible on-board computer Reference Model

PCB_img PCB_3D


Features

  • 3.3V system / LVTTL Logic level
  • Two user Power Output with ON-OFF Control
  • ATmega644P or ATmega1284P, 8MHz
  • Size: 45x45mm pin pitch compatible with UP-204GSR Universal PCB
  • microSD hinge socket
  • Two SPI ROM Option (FlashROM, FRAM, etc..) support SO8W and SO8N
  • MPU-9250 9Dof Sensor
  • MS5611 Baromater
  • RX8900 RealTime Clock (TCXO) (Backup Battery Option)
  • INA226 Current Shunt monitor
  • I2C x1, UART x2, SPIx1, UserADCch x8, GPIOx14

System Block

system_diagram

PIN Map

  • VIN has Reverse current protection

Applications

  • analog & Motion Datalogger
  • Energy Harvest sensor
  • DIY Space
  • DIY HAB

Project Environment

Project Status

  • end of life (EOL)

Parts

82
QtyValueFootprintReferences
130.1uEIA:0402C3, C5, C8, C9, C10, C11, C12, C16, C18, C19, C20, C21, C24
410kEIA:0402R1, R2, R7, R13
410uEIA:0603C2, C15, C22, C23
41uEIA:0402C1, C4, C13, C14
4H**DRILL_HOLE:drill_M3Drill_M3, Drill_M3, Drill_M3, Drill_M3
31kEIA:0402R5, R6, R12
3CONN_11CONN_2.54MM:1x11PJ1, J2, J3
215pEIA:0402C6, C7
23.3kEIA:0402R3, R4
24.7EIA:0402R10, R11
2LOGOLOGO:N_LOGO_3mmG***, G***
2LT1761ES5-xxIC:SOT25U10, U11
2SML-D12M8WT86DIODE:D_0603D1, D2
10.01EIA:1206RS1
10.01uEIA:0402C17
153047CONN_1.27MM:DF13-2PJ5
1ATMEGA644PA-AURIC:QFP44U2
1BAS70T-05T-7-FDIODE:SOT-523D3
1INA226AQDGSRQ1IC:MSOP10U9
1LT1761ES5-3.3IC:SOT25U1
1M25XX_ROM1IC:SO8NWU8
1M25XX_ROM2IC:SO8NWU12
1MPU-9250IC:QFN24U6
1MS561101BA03-00LGA:8_MSU5
1NX3225GD-8MHZCRYSTAL:3225-2X1
1REF3320AIDCKTIC:SC70_3U3
1RX8900CECRYSTAL:RX8900CEU4
1microSD_hinge 0472192001SOCKET:microSD_hingeU7

The 62 most common of 82 parts.

Similar boards

  • 2 layers45 × 45 mmNLog 9DoF, the printed circuit board in 3D

    NLog 9DoF

    kentN/nLog_9DoF

    arduino compatible embedded microSD data logger

    55 parts1MIT
  • 2 layers50 × 35 mmPerpetualClock, the printed circuit board in 3D

    PerpetualClock

    CXJ007/LP_Clock

    Low-power clock

    93 parts
  • 4 layers150 × 137.1 mmController, the printed circuit board in 3D

    Controller

    CircuitGuy943/Sabre-Integrated-flight-controller

    (🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware

    282 parts2GPL-3.0
  • 4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

    Chromapi motherboard v1

    Mowibox/chromapi_motherboard

    Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

    139 parts2Apache-2.0
  • 4 layers83 × 67.5 mmMarineBoard, the printed circuit board in 3D

    MarineBoard

    Cadburies/SisuAssistant

    Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.

    162 parts1Apache-2.0
  • 4 layers80 × 80 mmQsbc zero, the printed circuit board in 3D

    Qsbc zero

    qfreiman/qsbc-zero

    Single Board Computer based on the i.MX6ULL

    243 parts1GPL-3.0

Questions

How big is the OBC644-10D PCB?

It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OBC644-10D use?

82 parts, built around the INA226AQDGSRQ1, MS561101BA03-00, LT1761ES5-3.3 and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OBC644-10D KiCad files?

From the kentN/OBC644-10D repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/OBC644-10D.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the OBC644-10D design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).