

OBC644-10D
arduino compatible on-board computer
- Size
- 45 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 76
- Pads
- 282
- Tracks, vias
- 1,060, 90
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Sep 2016
- Updated
- 17 Jul 2019
Overview
OBC644-10D is an open-source printed circuit board by kentN, from the kentN/OBC644-10D repository on GitHub, published under the MIT licence. It is a 2-layer board of 45 × 45 mm with 82 parts on 76 nets, routed with 1,060 tracks and 90 vias.
It is built around the INA226AQDGSRQ1, MS561101BA03-00 and LT1761ES5-3.3, with the MPU-9250, RX8900CE-NF and SML-D12M8WT86 among its other parts. Its parts include 24 capacitors, 12 ICs, 11 resistors, 4 connectors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6INA226AQDGSRQ1
VSSOP-10-0.5mm-40℃~+125℃ 0.1uV/℃ 0V~36V 10mA 10nA 140dB 2.5uV 2.7V~5.5V 330uA High-side detection、Low-side detection、Power monitoring、Digital output interface、Programmable threshold alarm ±40V VSSOP-10-0.5mm Current Sense Amplifiers ROHSTexas InstrumentsSupervisor And Reset ICsMS561101BA03-00
-- Pressure Sensors ROHSTE ConnectivityPressure SensorsLT1761ES5-3.3
SOT23-53.3V, 100mA, Low Noise, LDO Micropower RegulatorAnalog DevicesUncategorisedMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersRX8900CE-NF
SMD3225-10PSMD3225-10P Real Time Clocks ROHSNyfeaReal Time ClocksSML-D12M8WT86
0603-40℃~+85℃ 16mcd 2.2V 20mA 54mW 572nm Discrete Diode Frosted White Lens Top-mount Yellow Green 0603 LED Indication - Discrete ROHSROHM SemiconductorLED Indication - Discrete
README
README.mdOBC644-10D
ATmega644/1284-based arduino compatible on-board computer Reference Model

Features
- 3.3V system / LVTTL Logic level
- Two user Power Output with ON-OFF Control
- ATmega644P or ATmega1284P, 8MHz
- Size: 45x45mm pin pitch compatible with UP-204GSR Universal PCB
- microSD hinge socket
- Two SPI ROM Option (FlashROM, FRAM, etc..) support SO8W and SO8N
- MPU-9250 9Dof Sensor
- MS5611 Baromater
- RX8900 RealTime Clock (TCXO) (Backup Battery Option)
- INA226 Current Shunt monitor
- I2C x1, UART x2, SPIx1, UserADCch x8, GPIOx14
System Block

PIN Map
- VIN has Reverse current protection
Applications
- analog & Motion Datalogger
- Energy Harvest sensor
- DIY Space
- DIY HAB
Project Environment
- KiCad (4.0.x)
- Arduino IDE (1.8.X)
- Sanguino bootloader ( https://github.com/Lauszus/Sanguino )
- SDfatlib
Project Status
- end of life (EOL)
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1u | EIA:0402 | C3, C5, C8, C9, C10, C11, C12, C16, C18, C19, C20, C21, C24 |
| 4 | 10k | EIA:0402 | R1, R2, R7, R13 |
| 4 | 10u | EIA:0603 | C2, C15, C22, C23 |
| 4 | 1u | EIA:0402 | C1, C4, C13, C14 |
| 4 | H** | DRILL_HOLE:drill_M3 | Drill_M3, Drill_M3, Drill_M3, Drill_M3 |
| 3 | 1k | EIA:0402 | R5, R6, R12 |
| 3 | CONN_11 | CONN_2.54MM:1x11P | J1, J2, J3 |
| 2 | 15p | EIA:0402 | C6, C7 |
| 2 | 3.3k | EIA:0402 | R3, R4 |
| 2 | 4.7 | EIA:0402 | R10, R11 |
| 2 | LOGO | LOGO:N_LOGO_3mm | G***, G*** |
| 2 | LT1761ES5-xx | IC:SOT25 | U10, U11 |
| 2 | SML-D12M8WT86 | DIODE:D_0603 | D1, D2 |
| 1 | 0.01 | EIA:1206 | RS1 |
| 1 | 0.01u | EIA:0402 | C17 |
| 1 | 53047 | CONN_1.27MM:DF13-2P | J5 |
| 1 | ATMEGA644PA-AUR | IC:QFP44 | U2 |
| 1 | BAS70T-05T-7-F | DIODE:SOT-523 | D3 |
| 1 | INA226AQDGSRQ1 | IC:MSOP10 | U9 |
| 1 | LT1761ES5-3.3 | IC:SOT25 | U1 |
| 1 | M25XX_ROM1 | IC:SO8NW | U8 |
| 1 | M25XX_ROM2 | IC:SO8NW | U12 |
| 1 | MPU-9250 | IC:QFN24 | U6 |
| 1 | MS561101BA03-00 | LGA:8_MS | U5 |
| 1 | NX3225GD-8MHZ | CRYSTAL:3225-2 | X1 |
| 1 | REF3320AIDCKT | IC:SC70_3 | U3 |
| 1 | RX8900CE | CRYSTAL:RX8900CE | U4 |
| 1 | microSD_hinge 0472192001 | SOCKET:microSD_hinge | U7 |
The 62 most common of 82 parts.
Similar boards
- 2 layers45 × 45 mm

- 2 layers50 × 35 mm

- 4 layers150 × 137.1 mm

Controller
CircuitGuy943/Sabre-Integrated-flight-controller
(🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware
282 parts2GPL-3.0 - 4 layers88.1 × 59.4 mm

Chromapi motherboard v1
Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.
139 parts2Apache-2.0 - 4 layers83 × 67.5 mm

MarineBoard
Cadburies/SisuAssistant
Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.
162 parts1Apache-2.0 - 4 layers65 × 73 mm

- 2 layers76.2 × 101.6 mm

- 4 layers80 × 80 mm

Questions
How big is the OBC644-10D PCB?
It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OBC644-10D use?
82 parts, built around the INA226AQDGSRQ1, MS561101BA03-00, LT1761ES5-3.3 and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OBC644-10D KiCad files?
From the kentN/OBC644-10D repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/OBC644-10D.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OBC644-10D design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).