2 layers38.1 × 17.8 mm
4 layers38 × 18 mm
Hg5932mg
keionbis/ServoController- Size
- 38 × 18 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 24
- Pads
- 140
- Tracks, vias
- 253, 76
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Jun 2018
- Updated
- 12 Jun 2018
Overview
Hg5932mg is an open-source printed circuit board by keionbis, from the keionbis/ServoController repository on GitHub. It is a 4-layer board of 38 × 18 mm with 21 parts on 24 nets, routed with 253 tracks and 76 vias.
It is built around the MC33926PNB and LDK320ADU33R. Its parts include 10 capacitors, 5 ICs, 4 connectors and 2 resistors. It belongs with the STM32 boards of this library.
Main components
2
MC33926PNB
PQFN-32-EP(8x8)-40℃~+125℃ 1 225mΩ 50uA 5A Yes PQFN-32-EP(8x8) Brushed DC Motor Drivers ROHSNXP SemiconductorsBrushed DC Motor Drivers
LDK320ADU33R
SOT-89-3-40℃~+125℃@(Tj) 1 100uA 18V 200mA 3.3V 350mV@(200mA) 63uVrms 88dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdServoController
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | C | Capacitors_SMD:C_0402 | C1, C2, C3, C5, C6, C8, C10 |
| 2 | Conn_01x04 | pads1x4:1x4Pads | J1, J3 |
| 2 | Conn_01x06 | Connector_Molex:Molex_CLIK-Mate_502443-0670_1x06-1MP_P2.00mm_Vertical | J2, J4 |
| 2 | R | Resistors_SMD:R_0402 | R1, R2 |
| 1 | AM4096Q | AM4096Q:AM4096Q | IC2 |
| 1 | C | Capacitors_SMD:C_1210 | C4 |
| 1 | CP | Capacitors_SMD:C_0402 | C7 |
| 1 | ECX-31B | ECX-31B:ECX-31B | c1 |
| 1 | LDK320ADU33R | LDK320ADU33R:ST-SOT-89 | IC3 |
| 1 | MC33926 | MC33926PNB:QFN80P800X800X220-33N | IC1 |
| 1 | hv5932mgMotor | hv5932mgMotor:hv5932mgMotor | U1 |
| 1 | stm32l011 | STM8L15:stm8l15 | ic1 |
More from keionbis/ServoController
1Similar boards
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers84.6 × 84.6 mm
- 2 layers169.8 × 97 mm
Ardumower
Starsurfer78/Ardumower_PCBs
DIY Robot Lawn Mower Community: https://www.diy-robot-lawn-mower.com/
75 parts1GPL-3.0 - 4 layers34 × 86 mm
- 2 layers75 × 50 mm
- 2 layers271.8 × 114.3 mm
- 4 layers50 × 42 mm
- 2 layers20.3 × 15.2 mm
L0 Controller motor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
12 parts546MIT
Questions
How big is the Hg5932mg PCB?
It measures 38 × 18 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hg5932mg use?
21 parts, built around the MC33926PNB and LDK320ADU33R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hg5932mg KiCad files?
From the keionbis/ServoController repository on GitHub, at the commit this page was made from: the board is hg5932mg.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hg5932mg design in my own project?
Its repository states no licence, so its author keeps all rights: ask keionbis before reusing the design.