4 layers90.2 × 40 mm
Radar v2
ckflight/FMCW-RADAR
Frequency Modulated Continuous Wave Radar hardware and software design files with 26 dBm output power covering around 250 m.
270 parts59GPL-3.0
4 layers15 × 33 mm
ThermalCamera
keionbis/ThermalCamera- Size
- 15 × 33 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 24
- Nets
- 26
- Pads
- 145
- Tracks, vias
- 213, 65
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Mar 2019
- Updated
- 8 Mar 2019
Overview
ThermalCamera is an open-source printed circuit board by keionbis, from the keionbis/ThermalCamera repository on GitHub. It is a 4-layer board of 15 × 33 mm with 24 parts on 26 nets, routed with 213 tracks and 65 vias.
It is built around the MIC5219-2.9YM5-TR, LD39015M125R and SG-210STF. Its parts include 13 capacitors, 4 ICs, 4 connectors, 2 resistors and 1 crystal.
Main components
3
MIC5219-2.9YM5-TR
SOT-23-5-40℃~+125℃ 1 12V 2.9V 500mA 600mV@(500mA) 75dB@(120Hz) 8uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLD39015M125R
SOT-23-5-40℃~+125℃@(Tj) 1 1.25V 100mV@(100mA) 150mA 29uVrms 5.5V 50uA 65dB@(1kHz) Enable、Short Circuit Protection、Thermal Shutdown Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SG-210STF
SMD2520-4P-40℃~+85℃ 1.6V~3.6V 1.8mA 13MHz ±50ppm SMD2520-4P Crystal Oscillators ROHSSeiko EpsonOscillators
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1Uf | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C11, C12, C13 |
| 4 | 0.1Uf | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4 |
| 2 | 47pf | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3, J4 |
| 2 | MIC5219-2.9YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | Conn_01x10_Female | Board to Board:10PIN | J1 |
| 1 | Conn_01x10_Male | Board to Board:10PIN | J2 |
| 1 | Flir_LEPTON | 1050281001:105028-1001 | U1 |
| 1 | LD39015M125R | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | SG-210STF | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | X1 |
Questions
How big is the ThermalCamera PCB?
It measures 15 × 33 mm and has 4 copper layers, 1 mm thick.
What parts does the ThermalCamera use?
24 parts, built around the MIC5219-2.9YM5-TR, LD39015M125R and SG-210STF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ThermalCamera KiCad files?
From the keionbis/ThermalCamera repository on GitHub, at the commit this page was made from: the board is ThermalCamera.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ThermalCamera design in my own project?
Its repository states no licence, so its author keeps all rights: ask keionbis before reusing the design.
Similar boards
- 4 layers158 × 95 mm
FHNW Pro4E FS19T8-3DPrinterBoard STM32
mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)
264 parts17GPL-3.0 - 4 layers71.1 × 94 mm
Ipotcas
SuperTails/ipotcas
IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string
75 parts12 - 6 layers90.2 × 95.9 mm
Lora payload
dpmj/masters-thesis-lora-gateway-compute-module-cubesat-payload-pcb
Hardware source (KiCad) from my master's thesis in telecommunications engineering at the Polytechnic University of Valencia, 2025.
403 parts2CERN-OHL-S-2.0 - 2 layers46.9 × 46.6 mm
Fourth
Bhakti-A/Maya_V_FlightController
This is a custom flight controller PCB designed for drones.
84 parts1 - 2 layers92.9 × 54.5 mm
- 4 layers27 × 55.5 mm
NS FPGA V2 iCE
uzzambutt/NorthernStudios-iCE40-UltraPlus-FPGA-Dev-Board
NorthernStudios iCE40 UltraPlus FPGA Dev Board
70 parts1MIT - 4 layers100 × 75 mm
ProgrammaGull Sandpiper
4n3m4i1/PG_Logic
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
214 partsMIT