

TMIT FC FINAL
SMT based flight computer created for thrustMIT
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 93
- Nets
- 95
- Pads
- 320
- Tracks, vias
- 958, 182
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Sep 2023
- Updated
- 12 Sep 2023
Overview
TMIT FC FINAL is an open-source printed circuit board by keeratrajsinghwork, from the keeratrajsinghwork/TMIT_FC_SMT repository on GitHub. It is a 4-layer board of 100 × 100 mm with 93 parts on 95 nets, routed with 958 tracks and 182 vias.
It is built around the MPU-6050, USBLC6-2SC6 and PZT2222A. Its parts include 27 resistors, 25 capacitors, 11 connectors, 6 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
3MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)PZT2222A
SOT-223-55℃~+150℃ 1 NPN 1.5W 10nA 300MHz 300mV 35 40V 600mA 6V NPN SOT-223 Bipolar (BJT) ROHSonsemiBipolar (BJT)
README
README.mdTMIT_FC_SMT
SMT based flight computer created for thrustMIT
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_1206_3216Metric | C7, C8, C9, C10, C11, C12, C13, C15, C18, C23, C26, C32 |
| 7 | TestPoint_Probe | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP8 |
| 5 | 22 | Resistor_SMD:R_1206_3216Metric | R9, R14, R15, R17, R19 |
| 5 | 2k49 | Resistor_SMD:R_1206_3216Metric | R7, R20, R21, R25, R26 |
| 4 | Conn_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2, J4, J6, J12 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, DS1, DS2, DS3 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 0 | Resistor_SMD:R_1206_3216Metric | R43, R44, R45 |
| 3 | 100 | Resistor_SMD:R_1206_3216Metric | R36, R37, R39 |
| 3 | 2k2 | Resistor_SMD:R_1206_3216Metric | R10, R11, R12 |
| 3 | PZT2222A | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q2, Q3, Q4 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3, J9, J10 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C14, C20 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 2 | 10pF | Capacitor_SMD:C_1206_3216Metric | C17, C19 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | 22r1, R_something1 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C1, C4 |
| 2 | 56 | Resistor_SMD:R_1206_3216Metric | R5, R23 |
| 1 | 1.65k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R13 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric | C21 |
| 1 | 200k | Resistor_SMD:R_1206_3216Metric | R24 |
| 1 | 25MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | X1 |
| 1 | 2K49 | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 2n2 | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 2u2 | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 383 | Resistor_SMD:R_1206_3216Metric | R22 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric | C22 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BZ1 |
| 1 | Conn_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J11 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J13 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LPS22DFTR | QFN_22DFTR_STM:QFN_22DFTR_STM | U2 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | Micro_SD_Card | Micro_SD:Micro_SD | U6 |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105133-0001 | J1 |
Similar boards
- 2 layers50 × 66 mm

- 4 layers132.5 × 105 mm

HEXCORE PCB Design v0
JoshCrouch/HEXCORE
HEXCORE is a Hexapod-type robot that includes both a custom remote as well as vision system making use of 2.4GHz RF and WiFi respectively.
160 parts3 - 2 layers47.9 × 28.5 mm

Posture tracker v2
kiranj26/Posture-Tracker-Using-ESP32
Posture Correction using ESP32-MINI-1 and MU sensor (GY-521 / MPU-6050)
52 parts3MIT - 4 layers67.5 × 53.5 mm

Flight controller rev2
shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.
65 parts3MIT - 4 layers62.2 × 54.6 mm

Flight ControllerV1.0
alihaanc/SKYKILLER-Development-Board
Drone and Rocket Development PCB board
59 parts2 - 2 layers45.4 × 36 mm

STM32 Vibrations Monitor
AnooshZ/VibrationMonitor-MPU6050
Arduino + MPU6050 vibration monitoring system with threshold detection, Python live plotting, and KiCad PCB design.
44 parts2MIT - 4 layers100 × 70 mm

Controller
Eryk-Mozdzen/hogger2
Hemispherical Omnidirectional Gimbaled (HOG) wheel - this robot have two of them
208 parts2 - 4 layers52 × 50 mm

VoxConductor
LighthouseXy/VoxConductor
VoxConductor — ESP32-S3 desktop intelligent voice hub with LVGL, ASR, DeepSeek, streaming TTS, weather and microSD logging
64 parts2MIT
Questions
How big is the TMIT FC FINAL PCB?
It measures 100 × 100 mm and has 4 copper layers, 4.69 mm thick.
What parts does the TMIT FC FINAL use?
93 parts, built around the MPU-6050, USBLC6-2SC6 and PZT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TMIT FC FINAL KiCad files?
From the keeratrajsinghwork/TMIT_FC_SMT repository on GitHub, at the commit this page was made from: the board is TMIT_FC_FINAL.kicad_pcb and its schematic TMIT_FC_FINAL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TMIT FC FINAL design in my own project?
Its repository states no licence, so its author keeps all rights: ask keeratrajsinghwork before reusing the design.