
MC stack
keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

Flight Computer designed for thrustMIT for Spaceport America Cup 2024.
PDB Board is an open-source printed circuit board by keeratrajsinghwork, from the keeratrajsinghwork/Stack_based_FC_tMIT repository on GitHub. It is a 2-layer board of 70 × 70 mm with 25 parts on 52 nets, routed with 24 tracks and 14 vias.
It is built around the AMS1117-3.3. Its parts include 7 capacitors, 4 resistors, 3 ICs and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LED_SMD:LED_0805_2012Metric | 3.3V_LED, 5V_LED, 7.4V1_LED, 7.4V2_LED |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C9 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C8 |
| 2 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | CAM+TELEM, PRIMARY |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | CAM+TELEM SWITCH, PRIMARY SWITCH |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 0.33u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 56 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | FC_stack | FC_Stack_template:FC_Stack_template | U1 |
| 1 | LM7805_TO220 | Package_TO_SOT_SMD:TO-252-2 | U2 |

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

keeratrajsinghwork/Stack_based_FC_tMIT
Flight Computer designed for thrustMIT for Spaceport America Cup 2024.


pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io


MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver



shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the keeratrajsinghwork/Stack_based_FC_tMIT repository on GitHub, at the commit this page was made from: the board is PDB/PDB_Board.kicad_pcb and its schematic GPIO_stack/GPIO_stack/GPIO_stack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask keeratrajsinghwork before reusing the design.